Technical Topics > Software
directKiwi project
linkz:
Hi Ben
Thanks for the feedback again, the only ones i got so far, in fact I have no idea how many people use the software :P
For Windows you can enable map zooming by uncommenting line 443 of the python code
Hope it will be better for you but it's a bit bugged as the mouse wheel will also act for the embedded console output.. ah Windows..
I'm not really decided to work on directKiwi anymore, my focus is/was on directTDoA project nowadays (version 4.20 is almost at its best)
BTW, the GUI map display is originally from this project so I've decided to merge some of the codes in directKiwi to make it better.
Regards
&linkz
linkz:
Hi all
I have released the v5.00 version of directKiwi python GUI code today
Some months ago, I've told you I will not work on the code anymore but finally I've done some modifications to fit my needs :P
Main changes:
* No more s-meter, yes.. no more. No real interest to me and consuming CPU time for nothing.
* The switch between nodes is now faster as you just have to left-click on the square icons to move from node to node.
* It's still possible to get KiwiSDR informations, connect via browser, check SNR, add/rem favorite/blacklist. To do so, just right-click on node icons.
* The code has been cleaned, commented and some parts were totally re-written.
* The directKiwi.cfg file is now in json format. Note that if you already have a filled config file from old GUI versions (<= v4.00), I've add some code to convert it for v5.00 compatibility, just backup & copy your .cfg in the new v5.00 directory. You'll keep your previous settings then.
* Audio parameters (LP filter/HP filter/AGC/MGC/gain/threshold/slope/decay/hang) are now shown in an unique Tk window.
* You can now change the map icon size
* Map zoom is still desactivated but you can still uncomment lines 379 (for Windows) or 380,381 ( for Linux/MacOS) manually to allow that functionnality if needed.
http://81.93.247.141/~linkz/directKiwi/
https://github.com/llinkz/directKiwi
&linkz
linkz:
FYI
directKiwi 6.0 is out.
no more pygame & scipy (for MacOS), sounddevice python module + libsamplerate instead -> works with 20kHz KiwiSDRs + no audio compression set by default
IS0KYB microkiwi_waterfall script added (SNR measurement + waterfall display), IS0KYB SNR website source is not used anymore + code clean up
http://81.93.247.141/~linkz/directKiwi/
https://github.com/llinkz/directKiwi
&linkz
Josh:
Perhaps a mode or stand alone one click app to tdoa in keeping with the minimum needed to do the job?
linkz:
Done... v6.10
using ?ext=tdoa,lat:yyy,lon:xxx,z:5,<submitted node> URL parameter
Note: The submitted node function will probably not working all the time as I'm not using the same algorithm to define empty "tdoa_id" fields from the nodes
&linkz
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version