Technical Topics > Software

Pitch shift idea

(1/2) > >>

OgreVorbis:
So I was thinking about the limitations of audio bandwidth for broadcasting. I was wondering what it would sound like if instead of filtering at something like 2-5khz (which is around the standard), you instead pitch shift down everything above that. I don't mean pitch shift everything, just what is above where the filter cuts off. What would this sound like? Clearly it would sound lower, but would it improve the quality of the music without using more bandwidth?

Also is this possible in any software (like audacity maybe)?

OgreVorbis:
So, I just tested it in audacity. Audacity doesn't have the feature to pitch shift only a specific range, so:
I added the track twice.
Put a high pass filter on the first one.
Pitch shifted the first one.
Then put a 2.5Khz low pass on both tracks.
Played them together.

It sounds about the same as it would if you just used an EQ to the higher frequencies. Maybe it could be done better though. This was just me messing around. You could probably optimize the pitch shift to make it better. You might get distortion if the pitch shift isn't right.

Stretchyman:
Just TX a wider B/W, I usually cutoff over 7KHz.

The pitch shifting kinda sounds like a very wierd idea bud!!???

Str.

TheRelayStation:
a better idea is to have a TX that has full audio range and use a professional sound processor to control, filter and tailor the audio to your specific desires.
obviously, loss of the audio amplitude level is greater at higher audio frequencies which is why (modified) pre-emphasis is used as an industry standard for AM broadcasting.
this is why many SWBC stations generally have their audio frequency set at 5Khz (10Khz total occupied bandwidth), audio density is greater with less bandwidth being used.

Josh:
What is really needed is called companding. The tx side has the compressor, the rx side has the expander. If one or the other lacks the means, the effort becomes pointless.

Navigation

[0] Message Index

[#] Next page