Technical Topics > Software

FLDIGI question re automatic, timed transmissions

(1/1)

Strange Beacons:
I use WSJT-X for WSPR transmissions and I like the way that it automatically transmits, stops for a timed interval, then transmits again.

Question: Is there any way that FLDIGI can be set up so that it will transmit automatically? (I'm wanting to use FLDIGI to send a CW signal at a timed interval).

Any help would be greatly appreciated. I've searched online and cannot find any source that discusses this question.

Strange Beacons:
OK, I finally figured out how to do this! To set up a timed transmission, do the following:

In FLDIGI, right click on a macro button, then paste the text you see below. Note that the "60" is the amount of time in seconds between transmissions and you can set it to any value that you want:

<TX>

<TIMER:60>

(Insert your transmission text here)

<RX>

Once you click on the finished macro, the transmission will automatically transmit every 60 seconds, hands-free.

Navigation

[0] Message Index