HFU HF Underground

Technical Topics => Equipment => Topic started by: radioreddz on March 28, 2021, 2357 UTC

Title: Connect ML30A+
Post by: radioreddz on March 28, 2021, 2357 UTC

How are folks using the MLA30+ connecting the cable to the radio what type of adapter is needed to connect to a Icom 745

Title: Re: Connect ML30A+
Post by: TRI International on March 29, 2021, 0932 UTC

Hi look at the sma-uhf so-230 uhf kit on Amazon to see if this is what you need. SMA-UHF RF PL250 SO239 adapter around $7.68.

Just in case you may want to connect to SW Receiver  the Eightwood UHA also on Amazon for about $8.49 Female so 239 to 3.5 mono 1/8 antenna which goes into the antenna slot on receiver.

Hope this helps.

Title: Re: Connect ML30A+
Post by: radioreddz on July 28, 2021, 2020 UTC

Quote from: TRI International on March 29, 2021, 0932 UTC

Hi look at the sma-uhf so-230 uhf kit on Amazon to see if this is what you need. SMA-UHF RF PL250 SO239 adapter around $7.68.

Just in case you may want to connect to SW Receiver  the Eightwood UHA also on Amazon for about $8.49 Female so 239 to 3.5 mono 1/8 antenna which goes into the antenna slot on receiver.

Hope this helps.

thanks that did the trick