HFU HF Underground

Loggings => HF Beacons => Topic started by: syfr on February 28, 2010, 2143 UTC

Title: 8.350 Mhz dasher testing today
Post by: syfr on February 28, 2010, 2143 UTC

Any loggings appreciated---today 300mW

Title: Re: 8.350 Mhz dasher testing today
Post by: beaconman on February 28, 2010, 2210 UTC

very weak into Colorado at 2211 Utc

Title: Re: 8.350 Mhz dasher testing today
Post by: Sealord on February 28, 2010, 2228 UTC

Fair signal through the static into Florida this afternoon w/some UTE QRM on 8350khz in USB mode.

Audio (22:23z-22:25z): https://www.yousendit.com/download/RmNCSmJ6SEJlcEpjR0E9PQ

Title: Re: 8.350 Mhz dasher testing today
Post by: Sealord on March 01, 2010, 2316 UTC

Better overall reception today with deep fading at times.  Not bad for 300mW!

Audio (22:55z-22:57z): https://www.yousendit.com/download/RmNEYUlncG9VbS92Wmc9PQ

Title: Re: 8.350 Mhz dasher testing today
Post by: beaconman on March 01, 2010, 2330 UTC

At 2324Utc NC dasher into Colorado solid copy...always nice to DX the east coast Phfers

Title: Re: 8.350 Mhz dasher testing today
Post by: RIVER RAT on March 02, 2010, 0317 UTC

Heard into Wisconsin @ 0315 utc very weak.

Title: Re: 8.350 Mhz dasher testing today
Post by: beaconman on March 03, 2010, 1943 UTC

caught the NC dasher 8350 khz on the Albany NY Tunner
at 1742Utc very strong for a milliwatt signal...

Title: Re: 8.350 Mhz dasher testing today
Post by: beaconman on March 07, 2010, 2338 UTC

Got it today 2337Utc

Title: Re: 8.350 Mhz dasher testing today
Post by: QRP on March 08, 2010, 0922 UTC

Quote from: syfr on February 28, 2010, 2143 UTC

Any loggings appreciated---today 300mW

Cannot hear it ... :(
Your antenna is probably too bad.
//QRP

Title: Re: 8.350 Mhz dasher testing today
Post by: syfr on March 09, 2010, 0041 UTC

Well, that might be possible, except that it was logged in Utah, Colorado, Florida and N.York, so I kind of doubt it.

Title: Re: 8.350 Mhz dasher testing today
Post by: beaconman on March 10, 2010, 0048 UTC

Solid copy on NC dasher at 2359 and it is gaining in strength
Thanks for the beacon...HQ 180 end fed wire