HFU HF Underground

Loggings => North American Shortwave Pirate => Topic started by: JoeFLIPS on September 04, 2016, 0142 UTC

Title: WORK ? 6955 USB 0141 UTC 9/4/16
Post by: JoeFLIPS on September 04, 2016, 0142 UTC
0141- OM talking after Wolverine Radio sign off, S3-4
0143- mentioned "440" and "448"
0145- OM mentioned "threads"  ???
0149- OM mentioned "WORK and Working Man"
0150- off.

 Thanks for the show!  :) WORK "Workers Operating Radio Knobs" was an old pirate back in the 90s
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: Skipmuck on September 04, 2016, 0144 UTC
Here also since 0140 UTC. I'm hearing an OM talking but tough copy through the noise...getting only partial sentences
OFF at 0149 UTC
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: Dick Weed on September 04, 2016, 0145 UTC
Some dude talking about nuts and bolts. s5
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: Rafman on September 04, 2016, 0145 UTC
Very weak copy but he's been in there since 0140z & still there!
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: Hornet0123 on September 04, 2016, 0146 UTC
Very weak s3 in the noise here.  Can hear talking but cannot make out
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: WA4FHY on September 04, 2016, 0146 UTC
0138 - someone giving talk about machine screw standards
0150 - s/off w/ "remember, everything works better w/a little
lubrication. Good night, folks." Had a good sig into Nashville.
Title: Re: UNID 6955 USB 0141 UTC 9/4/16
Post by: PirateSWL on September 04, 2016, 0146 UTC
WORK 6955 USB SIO 2/2/2 9/3/16

0141: OM talking about National Pipe Thread measurements

starting to fade out a bit at 0145
Title: Re: WORK ? 6955 USB 0141 UTC 9/4/16
Post by: refmo on September 04, 2016, 0151 UTC
Had the same here, nice signal at start, but faded after a few minutes.
Thanks for the ID, JoeFLIPS, I missed that.
Title: Re: WORK ? 6955 USB 0141 UTC 9/4/16
Post by: ChrisSmolinski on September 04, 2016, 1520 UTC
About an SIO 333 here on the SDR recording, thanks for the refresher course!