HFU HF Underground
Loggings => DGPS => Topic started by: Oliver on December 22, 2016, 2059 UTC
-
This is the result of my first run with Amalgamated DGPS.
Count ID ref1 ref2 kHz Baud City Country Lat Lon km Deg
1 881 262 263 302,0 100 Point Loma, CA United States 32,677 -117,25 9.276 316
1 715 015 001 297,0 200 Exmouth, WE Australia -21,885 114,134 13.003 92
1 972 901 902 302,0 200 Miraflores Panama 8,993 -79,585 9.057 274
1 644 688 689 302,0 200 Hachijo Shima Lt Japan 33,088 139,869 9.551 39
1 373 545 546 301,0 200 Rumelifeneri Turkey 41,239 29,113 1.951 116
1 468 734 001 298,0 100 Nynashamn Sweden 58,946 17,958 1.090 32
1 831 102 103 298,0 100 Upper Keweenaw, MI United States 47,233 -88,628 6.509 308
1 946 344 345 299,0 200 Rigolet, NL Canada 54,25 -58,5 4.329 302
1 510 790 820 301,0 200 Halten Lt Norway 64,176 9,41 1.468 3
1 001 460 001 300,0 100 Ponta se Sao Marcos Lt Brazil -2,492 -44,302 7.719 237
1 880 260 261 300,0 200 Kokole Point, Hi Hawaii 21,984 -159,765 11.810 348
1 622 644 645 301,0 200 Naozhoudao China 20,9 110,6 9.062 67
2 847 058 059 301,0 200 Annapolis, MD United States 39,018 -76,61 6.403 294
2 937 330 331 298,0 200 Hartlen Point, NS Canada 44,583 -63,45 5.166 291
2 446 686 696 297,0 100 Girdle Ness Lt Scotland 57,142 -2,056 941 320
3 866 162 163 299,0 200 Sallisaw, OK United States 35,369 -94,817 7.819 302
3 639 678 679 302,0 200 Shiriya Saki Japan 41,437 141,469 8.796 34
3 792 136 137 297,0 200 Bobo, MS United States 34,125 -90,696 7.674 299
I used an audio recording of 3,32 minutes made with an Elad FDM-S2 and longwire antenna at 50°-230°.
Recording start was 1632 UTC.
For sure I have to optimize my Elad settings, since the file is way to large and took almost two hours to decode. But it's a start I guess.
How accurate the loggings truly are is another question I will have to find out in the next few weeks.
-
Great to see your first logs, Oliver.
Since you're in Europe, you may want to make sure the 0.5 khz channel option is ON, since there are lot of such stations over there.
What are your ZCount settings, offset and max error? Offset should be 24, for the max error 20 or 30 may be a good place to start.
You may be able to directly feed I/Q recordings from your Elad, if you used audio this time. A narrow recording seems to work best, as close to 50 kHz as you can get, centered at 305 kHz.
How long was the recording? Two hours seems too long to take to decode just 3 minutes of audio. Or was this really an I/Q file?