HFU HF Underground

Technical Topics => Equipment => Topic started by: martini577450 on September 04, 2022, 2036 UTC

Title: Sangean ATS-909x repair needed
Post by: martini577450 on September 04, 2022, 2036 UTC

Does anyone know where I can get my radio repaired?

Here's the problem, I can't fully insert my external antenna plug into the jack. If I do the signal is very weak, if its loosely inserted only part way it has a great signal - then it can fall out easy. I don't know why this happened. I like to use this radio along with a Eton Elite Executive to record shows on my Sangean DAR-101.

Is there some way of rewiring the antenna plug to correct this or do I need a new antenna jack in the radio?

Thanks for any suggestions

Title: Re: Sangean ATS-909x repair needed
Post by: flexoman61 on September 04, 2022, 2101 UTC

Did the jack work properly before? If it's the first time you have used it you may just have the wrong kind of jack. The ant jack I use on my portable is a tip, sleeve (TS). There several different kinds, tip, ring, sleeve (TRS) etc.
A little reading up on the net should help out if it's just a jack problem.

Title: Re: Sangean ATS-909x repair needed
Post by: martini577450 on September 04, 2022, 2109 UTC

Yes it did work properly before.

Title: Re: Sangean ATS-909x repair needed
Post by: flexoman61 on September 04, 2022, 2133 UTC

Ok, hopefully it's not the radio and maybe the jack just had a wire pull off. Someone here should be more helpful and good luck.

Title: Re: Sangean ATS-909x repair needed
Post by: Pigmeat on September 13, 2022, 0054 UTC

Did you get the optional three year warranty and are you still covered by it? If so, you can just ship it back to them. Sangean has stateside offices to handle this stuff. If not there's a company in Canada that specializes in upgrading and repairing 909's. I think it's called Radio World? It's been years since I've seen one of their ad's though. 

Title: Re: Sangean ATS-909x repair needed
Post by: CoolAM Radio on September 13, 2022, 1253 UTC

Google with txt  repair sangean ats-909x antenna jack problem

Or type same txt in Youtube search field!

Maybe find some simple solutions there!


André
CoolAMRadio/OHR Radio
the Netherlands

Title: Re: Sangean ATS-909x repair needed? try the eham review.
Post by: ThaDood on September 13, 2022, 1837 UTC

Here´s another place to scan through to find repair facilities. It´s what I did to get TOKO IF filters swapped-out of a Kenwood TM-D710A rig, since I´m not set-up to work on SMT tech. Good luck. https://www.eham.net/reviews/view-category?id=26

Title: Re: Sangean ATS-909x repair needed
Post by: CoolAM Radio on September 14, 2022, 1257 UTC

Read-/ or Download the

Sangean ATS-909x

Service Manual and/or User Manual

from my Google Drive!

https://drive.google.com/drive/folders/1aTsrGdZL2m0hbQcCcAR-15wsFafjrRhm?usp=sharing (https://drive.google.com/drive/folders/1aTsrGdZL2m0hbQcCcAR-15wsFafjrRhm?usp=sharing)

Maybe it's any help to you!


André
CoolAM Radio/OHR Radio
the Netherlands

Title: Re: Sangean ATS-909x repair needed
Post by: martini577450 on September 15, 2022, 0422 UTC

All,

I ordered  a stereo plug extension from Amazon: Monoprice 6ft 3.5mm Stereo Plug/Jack M/F Cable https://www.monoprice.com/Product?p_id=648

Cut it and wired the tip wire in the cord to the ring wire of the plug, soldered the braided strands and left the other 2 wires unattached , now its receiving fine with the lug fully inserted.

Thanks to all

Title: Re: Sangean ATS-909x repair needed
Post by: Pigmeat on September 15, 2022, 1411 UTC

Sounds good. I think you're really going to enjoy that radio.