HFU HF Underground
Technical Topics => Equipment => Topic started by: ihmeyers on December 05, 2013, 1858 UTC
-
Looking for a recommendation on a good antenna multi-coupler. What I want to do is split the lead-in from my vertical into three outputs
1) for fullband use (100khz-30 MHZ)
2) for LW use only ( I have filters to pass only 500khz and below)
3) for HF use only (I have filters to reject BCB and below)
The best multi-coupler I have seen is the Elad ASA-15. I use one to feed multiple rx from the antenna switch's output. I could buy another one to create the 3 outputs I need but they are expensive (~$450) and I really didn't want to spend that much. It's been hard to find one that's reasonably priced (+/- $100-$150) that works from 100khz-30MHZ.
Any recommendations are greatly appreciated!
Thanks,
Ian ;D
-
Hi Ian im using the Stridsberg-MC102/MC104 passive multicouplers 100khz-500mhz using the wellbrook active loops excellent performance and there not that expensive..
Regards Lino..
-
Thanks very much Lino. I'll pick up one of those or the Mini-Circuits which I've read about.
73,
Ian