HFU HF Underground

Technical Topics => SDR - Software Defined Radio => Topic started by: Oliver on March 28, 2017, 1243 UTC

Title: New ColibriNano SDR Receiver
Post by: Oliver on March 28, 2017, 1243 UTC

https://eesdr.com/en/products-en/receivers-en/colibrinano-en#description

Software support

ExpertSDR2
CW Skimmer
Skimmer Server
Third party software using ExtIO library

Specifications

Receiving bandwidth: 0.1 – 55 MHz
Oversampling receiving: 0.1 – 500 MHz
Blocking Dynamic Range (BDR): 110 dB
Sensitivity: 0.05 uV at 20M band, preamp = 0
IMD3 Dynamic Range: 95 dB
ADC resolution: 14-bit @ 122.88 MHz
Sample rate: 48, 96, 192, 384, 768 kHz and 1.5, 3.0 MHz
IQ resolution: 24 bit (16 bit at 1.5 and 3 MHz sample rates)
RF Input: (SMA connector, up to 15kV ESD protection)
Preamp range: from 31.5 up to +6 dB with 0.5 dB steps
Operating temperature: -10°C to 60°C
Dimensions: 90х25х17mm
Weight: 0.043kg

Accessories

Remote control using Pileup RPI server
SMA to BNC adapter
SMA to UHF adapter
CCW MW/HF active loop antenna

The stick is available on fleabay for $249.95 as pre-order.

Title: Re: New ColibriNano SDR Receiver
Post by: Josh on March 28, 2017, 1622 UTC

This sounds impressive in terms of dynamic range and sensitivity, especially the "up to 15kV ESD protection".