HFU HF Underground
Technical Topics => SDR - Software Defined Radio => Topic started by: KaySeeks on December 26, 2019, 0745 UTC
-
Looks like the rolled out some system updates to kiwiSDR
in the last 18 hours recently. I like the possibility of synchronous AM coming but I also really liked the AM Narrow option being readily available though. This is not rolled out to all kiwi nodes, only some right now. I came across this on the OK2KYJ SDR in Czechia.
Do people use DRM that much that it will be on the "front panel" (it has been available under extensions for a while now)?
(https://i.imgur.com/Cy8tMAk.png)
-
The narrow AM and narrow CW options are still there, though it took me a little while to find them.
Click on either the AM or CW button to select that mode. Now click again on the same button to toggle between normal and narrow bandwidth.
-
WHOA! I see that now. I swear that was not there earlier today.
-
Good to hear that SAM (Sync AM) is finally on the way to KiwiSDR in an upcoming release!
FWIW I have disabled DRM on my KiwiSDR.
-
Me, too, since it requires exclusive use of the receiver. Another reason to not like DRM. ;)
-
Me, too, since it requires exclusive use of the receiver. Another reason to not like DRM. ;)
Reasons to like DRM: { }
-
I also noticed the 20 KHz option disappeared from most of the Kiwi's online....sad :(
+-RH
-
I also noticed the 20 KHz option disappeared from most of the Kiwi's online....sad :(
+-RH
It reduces the number of receivers available on a KiwiSDR.
-
The DRM mode is disabled if the receiver is in the 20 kHz mode.