HFU HF Underground
Technical Topics => Equipment => Topic started by: Mickpeasoup on June 10, 2021, 2039 UTC
-
Long time lurker, first time poster.
I'm looking for a ready built 10 > 20W transmitter for the 48m SW band. Higher power than this is acceptable, but I prefer lower power for portable hilltop use.
I've seen a couple on ebay but I can't really find any info on them or anymore examples here in the UK.
Can anyone help please?
-
Look up Stretchyman here on HFU. He'll hook you up and is from the UK. I use his TXs. Email me if you like. :)
-IR
-
Well... (Could be a deep subject here.) You could do the alternative of a full multi-mode HF rig to do the job, with minimal modifications to audio and muffin fan finals cooling. For AM, Kenwoods, Icoms, even Alinco, can do the job with a 15W carrier, even though most will MAX to a 25W carrier, but it is recommended to stay 20W, or less. Stay away from Yaesu for AM TX'ing. They will be power hungry, drawing from 15A to over 20A of current at 13.8VDC. Plus, you could do USB option. Then, have the option of the other side, the RX portion of the rig to RX on site. On the TX side, look for TX audio FREQ response, the wider, the better. On older rigs, you might be able to widen the audio. Anyway, the option of using an HF rig for HF TX'ing, as an SW TX, has been done for +40 years now. Passing though.
-
I've thought about an HF rig, for SSB, but not to sure about the mods needed for out of band TXing, audio input ect.
Maybe someday, for now I'll stay with AM.
Unless you know how to modify a Ham rig, Stretchy TXs are ready to go.
-
MODS.DK is a great site to open many HF rigs up for wide-range TX'ing, https://www.mods.dk/ Also, other types of modifications there for repairs, audio improvements, etc. Today, there are other sites out there as well for opening up the TX FREQ range on rigs, but this site has been around and a good resource for years.
-
Wideband TX is often listed as a "MARS" mod, since that service does not align with the amateur HF bands.
Some transceivers can be fed audio through accessory jacks, including at least a few that bypass much of their internal audio processing chains if fed that way.
-
PM sent...
Yes I am in the U.K!
:)
Str.