Review Article  Open Access
Fabio Frassetto, Paolo Miotti, Luca Poletto, "Compression of ExtremeUltraviolet Ultrashort Pulses by Grating Configurations", Journal of Spectroscopy, vol. 2015, Article ID 495914, 9 pages, 2015. https://doi.org/10.1155/2015/495914
Compression of ExtremeUltraviolet Ultrashort Pulses by Grating Configurations
Abstract
The design and realization of grating instruments to condition the spectral phase of ultrashort extremeultraviolet pulses are discussed. The main application of such configurations is the temporal compression of pulses by compensating the phase chirp and getting close to the Fourier limit. We discuss the two configurations useful for the realization of ultrafast grating compressors, namely, the classical diffraction mount and the offplane one. The configuration may be applied to freeelectron lasers and highorder laser harmonics.
1. Introduction
The developments in laser technology over the last years lead to the generation of extremeultraviolet (XUV) and Xray coherent ultrashort pulses in the femtosecond and subfemtosecond time scale (1 fs = 10^{−15} s) [1, 2]. While femtosecond optical lasers have offered unique insights into ultrafast dynamics, short wavelength radiation offers the capability to access and measure the structural arrangement and electronic structure; therefore, the advent of highenergy, shortpulse Xray sources based on freeelectron lasers (FELs), highorder laser harmonics (HHs), and laser plasmas is now making it possible to probe the dynamics of electrons within molecules [3, 4]. In the following, we will focus our attention on HHs generated in gas and FELs, as ultrashort sources with high brightness, high degree of coherence, and high peak intensity.
The HH spectrum is described as a sequence of peaks corresponding to the odd harmonics of the fundamental laser wavelength and having an intensity distribution characterized by a vast plateau, whose extension is related to the pulse intensity and frequency. The use of advanced phase matching mechanisms and interaction geometries has made possible the generation of HHs up to the water window region (2.3–4.4 nm), while still using a tabletop laser source [5–7]. The radiation generated with the scheme of the HHs using fewopticalcycles laser pulses is currently the main tool for the investigation of matter with attosecond resolution (1 as = 10^{−18} s) [8–11]. Both trains [12, 13] as well as isolated [14–18] bursts of attosecond pulses have been experimentally demonstrated. Recently, circularly polarized attosecond pulses have been also demonstrated [19, 20]. The physical grounds of such short pulses originate from the model of HHs generation, that is, the phasematched emission of radiation as result of the recombination of a tunnelionized electron with its parent ion. Once the conditions for such recombination are realized in only one occurrence per laser pulse, an isolated ultrashort XUV pulse is generated. Both trains and isolated attosecond pulses are positively chirped, resulting from the different duration of the quantum paths that contribute to different portion of the emitted spectrum. A detailed discussion of the attosecond chirp is found in [21]. Due to the chirp, the pulse temporal duration is longer than the Fourier limit. The condition of being at the Fourier limit is equivalent to the condition of a frequencyindependent spectral phase and implies that the timebandwidth product is at its minimum and that there is no chirp. Positively chirped pulses may be temporally compressed down to the Fourier limit by introducing a system that gives a negative chirp that compensates for the intrinsic chirp of the pulse. This problem has been successfully addressed by exploiting the negative group delay dispersion (GDD) of a thin metallic filter (see [13, 15]) or broadband multilayer optics (see [16]). The introduction of a compressor tunable at different energies may add strong flexibility to the beamline when different spectral regions of operation are requested.
FEL sources facilities generate spatially coherent XUV/Xray radiation with characteristics similar to the light from optical lasers, ultrashort time duration, and an increase of 6–8 orders of magnitude on the peak brilliance with respect to 3rd generation synchrotrons, opening the way to new studies in ultrafast phenomena in different fields spanning from biology to physics of matter [22–25]. Several methodologies have been proposed for the generation of ultrashort FEL pulses in the femtosecond and subfemtosecond regime, as time slicing [26–28] or the reduction of the electron bunch charge [29], which has brought to the generation of FEL pulses as short as 3 fs [30]. Most of these methods rely on the selection of an opportunely small portion of the electron beam which undergoes FEL amplification. One of the main drawbacks common to these solutions is the reduction of the amount of charge effectively contributing to the light amplification. An alternative possibility is the optical compression of the radiation pulse generated by the whole electron beam. In this case, the electron beam is required to have a nonzero energy chirp in order to generate a chirped pulse. The FEL pulse has then to be compressed to reach the Fourier limit. As for solidstate lasers, where frequency chirping is introduced to stretch the pulse before its amplification and, then, after amplification, compensated to recover the ultrashort duration and high peak power, chirped pulse amplification may be applied also to FELs, if the seeding pulse is stretched in time before interacting with the electron beam [31–33]. Despite the necessity of an additional optical stage, namely, the FEL compressor, this solution allows the use of the whole electron beam charge obtaining a significantly higher number of photons with ultrashort duration.
Indeed, for both HHs and FEL facilities, the availability of a XUV and Xray tunable optical compressor is particularly attractive in order to increase the peak intensity and the time resolution of the source.
Here, we discuss the use of gratings at grazing incidence to realize a broadband and tunable XUV compressor for chirped pulses. In the design of instruments for photon handling in the XUV ultrafast domain, some differences with respect to traditional schemes are notable [34, 35]. The first is that, to exploit the very short duration of the pulse, the study of the optical length of the rays gathered by the pupil and their equalization is mandatory. Moreover, the much extended bandwidth available from the coherent XUV sources may be exploited only if the instrument has a rather flat spectral response. Finally, an overall high throughput of the instrument is often a crucial feature to maintain high peak intensity.
The use of gratings at grazing incidence to realize tunable monochromators for XUV ultrafast pulses is well established for both HHs and FELs. When using a grating for ultrafast pulses, the main problem to be faced is the pulsefront tilt that is introduced by diffraction. Two are the options in designing an ultrafast monochromator, namely, the singlegrating [36] or the doublegrating design [37, 38]. In the first case, being adopted as single grating, a residual pulsefront tilt has to be accepted at the output of the monochromator. In fact, each ray that is diffracted by two adjacent grooves is delayed by , where is the diffraction order, is the wavelength, and is the speed of light in vacuum. The pulsefront tilt is given by the total difference in the optical paths of the diffracted beam; that is, , where is the number of the illuminated grooves. The aim of the design is to find a suitable grating geometry that minimizes the temporal broadening. Singlegrating monochromators with response in the range of few tens of femtoseconds are presently used in HH beamlines [39–41] and FEL facilities [42]. In the second case, the design consists of a pair of gratings to compensate for the pulsefront tilt. The first grating is demanded to perform the spectral selection on an intermediate slit; the second grating compensates for the pulsefront tilt of the diffracted beam by equalizing the length of the optical paths, giving a temporal resolution much higher than the singlegrating design. Doublegrating instruments have been demonstrated to be very effective for HHs, with time resolution well below 10 fs [43–47]. The choice between the two options has to be performed as a tradeoff between efficiency and throughput, which are maximized in the singlegrating design, and temporal resolution, which is maximized in the doublegrating design. Doublegrating configurations, which are able to preserve the ultrafast duration of the pulse, have been also proposed as beam splitters for ultrafast intense pulses [48] and as IRXUV beam separators for HHs [49].
In this paper, we report on the use of gratings to realize XUV compressors for the conditioning of the spectral phase of chirped pulses. A brief introduction to the grating geometries that are required to realize XUV ultrafast instruments is given. The concept is applied to the realization of XUV compressors with applications to HHs and FELs. The concept may find suitable applications to ultrafast spectroscopy experiments.
2. Grating Geometries for Ultrashort Pulses
Grazingincidence gratings may be used in two different geometries: the classicaldiffraction mount (CDM) and the offplane mount (OPM) [50].
In the case of the CDM, the geometry is defined on a plane as shown in Figure 1(a). Let us define the incidence angle and the diffraction angle , respectively, as the angles between the direction of the input beam and the normal beam to the grating and the direction of the diffracted beam and the normal beam to the grating, both taken with positive signs. The grating equation for the CDM is , where is the wavelength, the diffracted order, and the groove density.
(a)
(b)
The geometry of the OPM is shown in Figure 1(b). In this case, the incident and diffracted wave vectors are almost parallel to the grating grooves [51]. The direction of the incoming rays is described by two parameters: the altitude and the azimuth. The altitude is defined as the angle between the direction of the incoming rays and the direction of the grooves. The azimuth of the incoming rays is defined to be zero if they lie in the plane perpendicular to the grating surface and parallel to the rulings. Let define the azimuth of the diffracted light at wavelength and order . The grating equation for the OPM is , where is the groove density. The OPM gives higher throughput than the classical mount, since it has been theoretically demonstrated and experimentally measured that the peak diffraction efficiency is close to the reflectivity of the coating at the altitude angle [52]. Therefore, the OPM geometry is suitable for the design of XUV grating instruments with high efficiency [53].
When realizing a compressor for ultrafast pulses, then the main problem to be dealt with is the pulsefront tilt given by a single grating. This effect, although negligible for picosecond or longer pulses, is dramatic in the femtosecond or even subfemtosecond time scale and has to be corrected by a second grating in a compensated configuration. From the point of view of the ray paths, the differences in the path lengths of rays with the same wavelength within the beam aperture that are caused by the first grating have to be compensated by the second grating; that is, all the rays with the same wavelength make the same optical path. The second grating compensates also for the spectral dispersion caused by the first grating; that is, all the rays at different wavelengths within the pulse spectrum exit the second grating with parallel directions. Both of these conditions are satisfied by a scheme with two equal plane gratings mounted with opposite diffraction orders; that is, the incidence angle on the second grating is equal to the diffraction angle of the first grating. The phase chirp introduced by the system may be finally calculated as the difference in the optical path between rays at different wavelengths. This principle is used in many ultrafast devices in the visible and near infrared, as it was demonstrated that grating pairs may be arranged to realize compensators for the laser cavity dispersion, phase modulators, stretchers, and compressors for chirped pulse amplification [54–56].
3. GrazingIncidence Grating Compressor
The basic version of the arrangement of a XUV grazingincidence grating compressor consists of two identical plane gratings mounted in the compensated configuration, as shown in Figure 2. Since the plane gratings have to be operated in parallel light, a XUV collimating mirror, that is, a paraboloidal or toroidal mirror, is required in front of the compressor. Therefore, the compressor consists of three optical elements, namely, the collimator and the two gratings. Due to the symmetry of the configuration, the output rays are parallel to the input rays for all the wavelengths. Indeed, in the case of the CDM, the incidence angle on G2, , is equal to the diffraction angle from G1, , and the diffraction angle from G2, , is constant with the wavelength and equal to the incidence angle on G1, . Similarly, in the case of the OPM, the azimuth angle of incident rays on G2, , is equal to the azimuth angle of diffracted rays from G1, , and the azimuth angle of the rays diffracted from G2, , is equal to the azimuth angle of the rays incident on G1, .
(a)
(b)
(c)
Since different wavelengths are diffracted by G1 at different angles, the rays do not make the same optical paths within the compressor. Therefore, the group delay (GD), intended here as the propagation time of the rays from the input plane of G1 to the output plane of G2, is not constant with the wavelength. Aim of the compressor is to introduce suitable groupdelay dispersion (GDD), which is a variation of the propagation time of the rays with different wavelengths.
As usual, GD is expressed as a function of : where is the optical path at frequency and is the speed of light in vacuum.
Let us define the central pulse frequency and the central wavelength as where the bandwidth of the pulse is limited between and .
In the case of the CDM, the optical path is analytically expressed (for less than a constant term) as where is the incidence angle on G1, and are, respectively, the diffraction angles from G1 at the generic wavelength and, at the wavelength , and is the G1G2 distance. In case of a narrowband pulse with %, (3) results in linear . Expressing and using the relation , it may be expressed as
Similarly, in the case of the OPM, the optical path is analytically expressed (for less than a constant term) as where the grating parameters have been calculated to have the wavelength diffracted at ; that is, . Expressing and using the relation , (5) is linearized in , in case of a narrowband pulse, as
Note that, in both cases, the optical path is anyway increasing with the wavelength and this forces the GDD introduced by the compressor to be negative.
Let us define as where and refer, respectively, to the CDM and to the OPM.
The optical path can be expressed as a function of with the relation
Equation (8) is expanded in series of and is integrated to obtain the expression of the phase as where the first coefficient that describes the distortion of the pulse temporal profile is
For a narrowband pulse, the GD is almost linear also in and the GDD is constant and negative; . Once the required GDD to compress the pulse has been defined, the above equations define the parameters of the grating compressor in both geometries.
Note that, in the CDM, the first grating is normally operated in the order ; that is, , since this gives a shorter distance , once the required GDD has been fixed, therefore, a more compact compressor. In the case of the OPM, the operations at order are totally equivalent.
Once the length of the arm has been selected, the two geometries give the same compression if ; that is, . Since is typically below 20° and is above 80°, the groove density that would be required in the OPM is much higher than the CDM and may not be available from grating providers. Therefore, a compressor in the OPM is typically longer than the corresponding CDM as will be shown in the test case presented below.
The compressor introduces a spatial chirp of the pulse; that is, rays with different wavelengths have the same output direction but they are not exactly superimposed. In the conventional design of compressors for IR pulses, the spatial chirp is canceled by making the beam pass two additional times through the same gratings, so the output spatial dispersion is zero. This cannot be realized in grazing incidence, since it would require the insertion of two additional gratings that would make the configuration too complex. The chirp is expressed, in case of a narrowband pulse of bandwidth , as where and refer, respectively, to the CDM and to the OPM. Since the rays are parallel, the spatial chirp does not influence the quality of the final spot size if the beam is focused by a proper concave mirror.
In the following, we will apply the doublegrating configuration to the case of compression of FEL pulses and of attosecond pulses generated through HHs.
4. Grating Compressor Applied to FEL Pulses
The doublegrating compressor, in which optical elements are used at grazing incidence, is very suitable for FEL pulses, since it has robust optical elements to be operated under the intense FEL radiation. Here, we assume the parameters of [57], which are reported in Table 1 and may be a test case for the application to FEL chirped pulse amplification.

The two geometries are compared using commercially available gratings with groove density as high as 2400 gr/mm. The resulting parameters of the compressor are shown in Figure 3. Note that the size of the OPM compressor is much larger than the CDM one. Indeed, the length of the instrument in the CDM may be easily reduced well below 0.5 m by using a lowdensity grating; on the contrary, the OPM requires at least about 1.5 m, unless extremely highdensity gratings, which are difficult to be manufactured, are adopted. The spatial chirp is shown in Figure 4. In the OPM case, for the G1G2 distance being much longer, the spatial chirp is larger. The main advantage of the OPM is the higher total efficiency, which can be quantified in the 0.15–0.20 range compared to the 0.04–0.07 range of the CDM (see [53]).
(a)
(b)
(a)
(b)
It may be concluded that the XUV doublegrating compressor for application to FEL radiation on a narrowband emission requires, in case of the OPM, a definitely larger space than the CDM and gives also a larger spatial chirp. On the other side, the OPM gives higher efficiency. The choice between the two geometries depends mainly on the surrounding conditions, such as the available space on the beamline and the mechanical stability of the optical mountings, which may force the choice of the more compact CDM configuration with respect to the OPM.
5. XUV Attosecond Compressor
The doublegrating configuration shown in Figure 2 is not suitable for the compression of XUV attosecond pulses, since the distance that is required to give the necessary GDD that compensates for the intrinsic pulse chirp is too small to be realized in practice. Therefore, the configuration has to be modified as shown in Figure 5. The design originates from the scheme of the doublegrating XUV ultrafast monochromator realized to select a suitable harmonic within the broad HHs spectrum without altering the intrinsic femtosecond pulse time duration [58]. The OPM is adopted since it gives higher efficiency in a compact environment.
The layout consists of four grazingincidence parabolic mirrors, indicated as P1, P2, P3, and P4, and two plane gratings operated in the OPM, indicated as G1 and G2. The compressor is divided into two equal sections, P1G1P2 and P3G2P4. Since the gratings have to be operated in parallel light, the first mirror of each of the two sections acts as the collimator and the second mirror as the condenser. The four mirrors are operated with unity magnification; that is, the input arms of P1 and P3 are equal to the output arms of P2 and P4. The gratings G1 and G2 have the same groove density and altitude.
The use of parabolic mirrors instead of the more simple toroidal ones adopted for the design of femtosecond monochromators (see [43]) is required to reduce the aberrations to negligible levels, since any residual aberration causes a spread of the optical paths within the aperture of the instrument. The ideal collimator and condenser, completely free from aberrations in case of a pointlike source, is the paraboloid. It can be shown that grazingincidence toroidal surfaces when used as collimating and condensing elements exhibit residual aberrations that cannot be tolerated in the attosecond time scale (see [58]).
In brief, the input beam is collimated by P1 and then is diffracted by G1, that is, placed at a distance S2 from P2. The latter realizes a spectrally dispersed image of the source on its focal plane, that is, the source plane for the second section. The beam is collimated by P3 and diffracted by G2, that is, placed at a distance S3 from P3. Due to the symmetry of the doublegrating configuration, all the rays diffracted from G2 are parallel and are finally focused on the output focal point by P4. The two focusing mirrors placed between the gratings act as a telescopic arrangement reducing the effective path between the gratings. This makes it possible to produce an effectively negative grating separation with positive GDD, differently from the compressor with plane gratings; continuously tune the GDD from negative to positive values; achieve the very small grating separations necessary for the compensation of the attosecond chirp.
Since all the rays are collimated in the paths S1 between P1 and G1 and S4 between G2 and P4, the GD does not depend on the choice of S1 and S4 but only on the choice of S2 and S3, in particular on the sum S = S2 + S3. This is the key parameter to be properly set to introduce the required GDD. Due to the symmetry of the configuration, G1 is imaged on G2 when S = 2p. This is the condition that gives group delay constant with the wavelength; that is, GDD = 0. For S < 2p, G1 is imaged behind G2 and the resulting GDD is positive. For S > 2p, G1 is imaged before G2 and the resulting GDD is negative, as shown in Figure 6. Therefore, the quantity plays the role of in the doublegrating compressor, being capable to give also negative values for . The tuning of the GGD is performed in a simple way by moving G2 and keeping G1 fixed. Therefore, the compressor has fixed input and output points, fixed output direction, and a single mechanical movement to finely tune the GDD.
(a)
(b)
(c)
As a test case, the design of a compressor for attosecond pulses in the 70–140 eV region is here discussed. Here, we assume the parameters of [59], which are reported in Table 2. The parameters of the compressor are reported in Table 3. The gratings have 200 gr/mm groove density and are operated at 1° altitude and 4.8° azimuth. The choice of the altitude has been done through raytracing calculations in order to minimize the spread of the optical paths of the rays with the same wavelengths, which states the ultimate limit of the time response at the output of the compressor, that results 12 as. The GD is shown in Figure 7. In such a large bandwidth, the GD is not linear, but it has also a quadratic term that originates thirdorder dispersion (TOD). It has been shown by simulation [59] that such a compressor is able to decrease the pulse duration down to ≈60 as FWHM, which is not far from the Fourier limit on the given bandwidth (35 as).


Note that the doublegrating configuration presented in the previous paragraph would give the same GDD for a G1G2 distance of 28 mm, which is not practically feasible.
6. Conclusions
The use of grazingincidence gratings to realize XUV compressors has been discussed for applications to HHs and FELs. Two different grating geometries, OPM and CDM, have been compared to show the peculiarities of both of them. The use of compressors may decrease the time duration of the pulse close to the Fourier limit and increase its peak intensity to offer full exploitation of femtosecond and subfemtosecond regime for ultrafast spectroscopy.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
References
 J. C. Diels and W. Rudolph, Ultrashort Laser Pulse Phenomena: Fundamentals, Techniques, and Applications on a Femtosecond Time Scale, Elsevier, New York, NY, USA, 2006.
 J. MarciakKozlowska and M. Kozlowski, From Femtoto Attoscience and Beyond, Nova Science Publishers, 2009.
 M. J. J. Vrakking and T. Elsaesser, “XRay photonics: Xrays inspire electron movies,” Nature Photonics, vol. 6, no. 10, pp. 645–647, 2012. View at: Publisher Site  Google Scholar
 F. Lépine, M. Y. Ivanov, and M. J. J. Vrakking, “Attosecond molecular dynamics: fact or fiction?” Nature Photonics, vol. 8, no. 3, pp. 195–204, 2014. View at: Publisher Site  Google Scholar
 Z. Chang, A. Rundquist, H. Wang, M. M. Murnane, and H. C. Kapteyn, “Generation of coherent soft X Rays at 2.7 nm using high harmonics,” Physical Review Letters, vol. 79, no. 16, pp. 2967–2970, 1997. View at: Publisher Site  Google Scholar
 M. Schnürer, Ch. Spielmann, P. Wobrauschek et al., “Coherent 0.5keV Xray emission from helium driven by a sub10fs laser,” Physical Review Letters, vol. 80, no. 15, pp. 3236–3239, 1998. View at: Publisher Site  Google Scholar
 E. J. Takahashi, T. Kanai, K. L. Ishikawa, Y. Nabekawa, and K. Midorikawa, “Coherent water window X ray by phasematched highorder harmonic generation in neutral media,” Physical Review Letters, vol. 101, no. 25, Article ID 253901, 2008. View at: Publisher Site  Google Scholar
 P. B. Corkum and F. Krausz, “Attosecond science,” Nature Physics, vol. 3, no. 6, pp. 381–387, 2007. View at: Publisher Site  Google Scholar
 F. Krausz and M. Ivanov, “Attosecond physics,” Reviews of Modern Physics, vol. 81, no. 1, pp. 163–234, 2009. View at: Publisher Site  Google Scholar
 G. Sansone, L. Poletto, and M. Nisoli, “Highenergy attosecond light sources,” Nature Photonics, vol. 5, no. 11, pp. 655–663, 2011. View at: Publisher Site  Google Scholar
 F. Krausz and M. I. Stockman, “Attosecond metrology: from electron capture to future signal processing,” Nature Photonics, vol. 8, no. 3, pp. 205–213, 2014. View at: Publisher Site  Google Scholar
 P. M. Paul, E. S. Toma, P. Breger et al., “Observation of a train of attosecond pulses from high harmonic generation,” Science, vol. 292, no. 5522, pp. 1689–1692, 2001. View at: Publisher Site  Google Scholar
 R. LópezMartens, K. Varjú, P. Johnsson et al., “Amplitude and phase control of attosecond light pulses,” Physical Review Letters, vol. 94, no. 3, Article ID 033001, 2005. View at: Publisher Site  Google Scholar
 R. Kienberger, E. Goulielmakis, M. Uiberacker et al., “Atomic transient recorder,” Nature, vol. 427, no. 6977, pp. 817–821, 2004. View at: Publisher Site  Google Scholar
 G. Sansone, E. Benedetti, F. Calegari et al., “Isolated singlecycle attosecond pulses,” Science, vol. 314, no. 5798, pp. 443–446, 2006. View at: Publisher Site  Google Scholar
 M. Schultze, E. Goulielmakis, M. Uiberacker et al., “Powerful 170attosecond XUV pulses generated with fewcycle laser pulses and broadband multilayer optics,” New Journal of Physics, vol. 9, article 243, 2007. View at: Publisher Site  Google Scholar
 K. Zhao, Q. Zhang, M. Chini, Y. Wu, X. Wang, and Z. Chang, “Tailoring a 67 attosecond pulse through advantageous phasemismatch,” Optics Letters, vol. 37, no. 18, pp. 3891–3893, 2012. View at: Publisher Site  Google Scholar
 M. Chini, K. Zhao, and Z. Chang, “The generation, characterization and applications of broadband isolated attosecond pulses,” Nature Photonics, vol. 8, no. 3, pp. 178–186, 2014. View at: Publisher Site  Google Scholar
 A. Fleischer, O. Kfir, T. Diskin, P. Sidorenko, and O. Cohen, “Spin angular momentum and tunable polarization in highharmonic generation,” Nature Photonics, vol. 8, pp. 543–549, 2014. View at: Publisher Site  Google Scholar
 F. Mauger, A. D. Bandrauk, A. Kamor, T. Uzer, and C. Chandre, “Quantumclassical correspondence in circularly polarized high harmonic generation,” Journal of Physics B: Atomic, Molecular and Optical Physics, vol. 47, no. 4, Article ID 041001, 2014. View at: Publisher Site  Google Scholar
 Y. Mairesse, A. De Bohan, L. J. Frasinski et al., “Highharmonics chirp and optimization of attosecond pulse trains,” Laser Physics, vol. 15, no. 6, pp. 863–870, 2005. View at: Google Scholar
 “Freeelectron laser FLASH,” http://flash.desy.de/. View at: Google Scholar
 SACLA (XFEL), November 2014, http://xfel.riken.jp/eng/.
 “LCLSLinac Coherent Light Source,” http://lcls.slac.stanford.edu/. View at: Google Scholar
 FERMI, 2014, http://www.elettra.trieste.it/FERMI/.
 P. J. Emma, K. Bane, M. Cornacchia et al., “Femtosecond and subfemtosecond Xray pulses from a selfamplified spontaneousemissionbased freeelectron laser,” Physical Review Letters, vol. 92, no. 7, Article ID 074801, 2004. View at: Publisher Site  Google Scholar
 Y. Ding, Z. Huang, D. Ratner, P. Bucksbaum, and H. Merdji, “Generation of attosecond xray pulses with a multicycle twocolor enhanced selfamplified spontaneous emission scheme,” Physical Review Special Topics—Accelerators and Beams, vol. 12, no. 6, Article ID 060703, 2009. View at: Publisher Site  Google Scholar
 T. Tanaka, “Proposal for a pulsecompression scheme in xray freeelectron lasers to generate a multiterawatt, attosecond Xray pulse,” Physical Review Letters, vol. 110, no. 8, Article ID 084801, 2013. View at: Publisher Site  Google Scholar
 J. B. Rosenzweig, D. Alesini, G. Andonian et al., “Generation of ultrashort, high brightness electron beams for singlespike SASE FEL operation,” Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 593, no. 12, pp. 39–44, 2008. View at: Publisher Site  Google Scholar
 Y. Ding, F.J. Decker, P. Emma et al., “Femtosecond Xray pulse characterization in freeelectron lasers using a crosscorrelation technique,” Physical Review Letters, vol. 109, no. 25, Article ID 254802, 2012. View at: Publisher Site  Google Scholar
 C. Pellegrini, “High power femtosecond pulses from an Xray SASEFEL,” Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 445, no. 1–3, pp. 124–127, 2000. View at: Publisher Site  Google Scholar
 X. Shu, T. Peng, and Y. Dou, “Chirped pulse amplification in a freeelectron laser amplifier,” Journal of Electron Spectroscopy and Related Phenomena, vol. 184, no. 3–6, pp. 350–353, 2011. View at: Publisher Site  Google Scholar
 C. Feng, L. Shen, M. Zhang, D. Wang, Z. Zhao, and D. Xiang, “Chirped pulse amplification in a seeded freeelectron laser for generating highpower ultrashort radiation,” Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 712, pp. 113–119, 2013. View at: Publisher Site  Google Scholar
 L. Poletto, G. Tondello, and P. Villoresi, “Highorder laser harmonics detection in the EUV and soft Xray spectral regions,” Review of Scientific Instruments, vol. 72, no. 7, pp. 2868–2874, 2001. View at: Publisher Site  Google Scholar
 L. Poletto, S. Bonora, M. Pascolini, and P. Villoresi, “Instrumentation for analysis and utilization of extremeultraviolet and soft xray highorder harmonics,” Review of Scientific Instruments, vol. 75, no. 11, pp. 4413–4418, 2004. View at: Publisher Site  Google Scholar
 L. Poletto and F. Frassetto, “Timepreserving grating monochromators for ultrafast extremeultraviolet pulses,” Applied Optics, vol. 49, no. 28, pp. 5465–5473, 2010. View at: Publisher Site  Google Scholar
 P. Villoresi, “Compensation of optical path lengths in extremeultraviolet and softXray monochromators for ultrafast pulses,” Applied Optics, vol. 38, no. 28, pp. 6040–6049, 1999. View at: Publisher Site  Google Scholar
 L. Poletto, “Timecompensated grazingincidence monochromator for extremeultraviolet and soft Xray highorder harmonics,” Applied Physics B: Lasers and Optics, vol. 78, no. 78, pp. 1013–1016, 2004. View at: Publisher Site  Google Scholar
 F. Frassetto, C. Cacho, C. A. Froud et al., “Singlegrating monochromator for extremeultraviolet ultrashort pulses,” Optics Express, vol. 19, no. 20, pp. 19169–19181, 2011. View at: Publisher Site  Google Scholar
 C. Grazioli, C. Callegari, A. Ciavardini et al., “CITIUS: an infraredextreme ultraviolet light source for fundamental and applied ultrafast science,” Review of Scientific Instruments, vol. 85, no. 2, Article ID 023104, 2014. View at: Publisher Site  Google Scholar
 L. Poletto, P. Miotti, F. Frassetto et al., “Doubleconfiguration grating monochromator for extremeultraviolet ultrafast pulses,” Applied Optics, vol. 53, pp. 5879–5888, 2014. View at: Google Scholar
 P. Heimann, O. Krupin, W. F. Schlotter et al., “Linac coherent light source soft Xray materials science instrument optical design and monochromator commissioning,” Review of Scientific Instruments, vol. 82, no. 9, Article ID 093105, 2011. View at: Publisher Site  Google Scholar
 L. Poletto and P. Villoresi, “Timedelay compensated monochromator in the offplane mount for extremeultraviolet ultrashort pulses,” Applied Optics, vol. 45, no. 34, pp. 8577–8585, 2006. View at: Publisher Site  Google Scholar
 L. Poletto, P. Villoresi, E. Benedetti et al., “Intense femtosecond extreme ultraviolet pulses by using a timedelaycompensated monochromator,” Optics Letters, vol. 32, no. 19, pp. 2897–2899, 2007. View at: Publisher Site  Google Scholar
 L. Poletto, P. Villoresi, F. Frassetto et al., “Timedelay compensated monochromator for the spectral selection of extremeultraviolet highorder laser harmonics,” Review of Scientific Instruments, vol. 80, no. 12, Article ID 123109, 2009. View at: Publisher Site  Google Scholar
 M. Ito, Y. Kataoka, T. Okamoto, M. Yamashita, and T. Sekikawa, “Spatiotemporal characterization of singleorder high harmonic pulses from timecompensated toroidalgrating monochromator,” Optics Express, vol. 18, no. 6, pp. 6071–6078, 2010. View at: Publisher Site  Google Scholar
 H. Igarashi, A. Makida, M. Ito, and T. Sekikawa, “Pulse compression of phasematched high harmonic pulses from a timedelay compensated monochromator,” Optics Express, vol. 20, no. 4, pp. 3725–3732, 2012. View at: Publisher Site  Google Scholar
 L. Poletto, P. Azzolin, and G. Tondello, “Beamsplitting and recombining of freeelectronlaser extremeultraviolet radiation,” Applied Physics B: Lasers and Optics, vol. 78, no. 78, pp. 1009–1011, 2004. View at: Publisher Site  Google Scholar
 F. Frassetto, P. Villores, and L. Poletto, “Beam separator for highorder harmonic radiation in the 3–10 nm spectral region,” Journal of the Optical Society of America A, vol. 25, no. 5, pp. 1104–1114, 2008. View at: Publisher Site  Google Scholar
 L. Poletto, F. Frassetto, and P. Villoresi, “Ultrafast grating instruments in the extreme ultraviolet,” IEEE Journal on Selected Topics in Quantum Electronics, vol. 18, no. 1, pp. 467–478, 2012. View at: Publisher Site  Google Scholar
 L. Poletto and F. Frassetto, “Design of highresolution grazingincidence echelle monochromators,” Applied Optics, vol. 48, no. 28, pp. 5363–5370, 2009. View at: Publisher Site  Google Scholar
 M. Nevière, “Experimental verifications and applications of the theory,” in Electromagnetic Theory of Gratings, R. Petit, Ed., chapter 4, Springer, Berlin, Germany, 1980. View at: Google Scholar
 M. Pascolini, S. Bonora, A. Giglia, N. Mahne, S. Nannarone, and L. Poletto, “Gratings in a conical diffraction mounting for an extremeultraviolet timedelaycompensated monochromator,” Applied Optics, vol. 45, no. 14, pp. 3253–3262, 2006. View at: Publisher Site  Google Scholar
 O. E. Martinez, “3000 times grating compressor with positive group velocity dispersion: application to fiber compensation in 1.3–1.6 μm region,” IEEE Journal of Quantum Electronics, vol. 23, no. 1, pp. 59–64, 1987. View at: Google Scholar
 O. E. Martinez, “Design of highpower ultrashort pulse amplifiers by expansion and recompression,” IEEE Journal of Quantum Electronics, vol. 23, no. 8, pp. 1385–1387, 1987. View at: Google Scholar
 L. Walmsley, L. Waxer, and C. Dorrer, “The role of dispersion in ultrafast optics,” Review of Scientific Instruments, vol. 72, no. 1, pp. 1–29, 2001. View at: Publisher Site  Google Scholar
 F. Frassetto, L. Giannessi, and L. Poletto, “Compression of XUV FEL pulses in the fewfemtosecond regime,” Nuclear Instruments and Methods in Physics Research Section A, vol. 593, no. 12, pp. 14–16, 2008. View at: Publisher Site  Google Scholar
 F. Frassetto, P. Villoresi, and L. Poletto, “Optical concept of a compressor for XUV pulses in the attosecond domain,” Optics Express, vol. 16, no. 9, pp. 6652–6667, 2008. View at: Publisher Site  Google Scholar
 M. Mero, F. Frassetto, P. Villoresi, L. Poletto, and K. Varjú, “Compression methods for XUV attosecond pulses,” Optics Express, vol. 19, no. 23, pp. 23420–23428, 2011. View at: Publisher Site  Google Scholar
Copyright
Copyright © 2015 Fabio Frassetto et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.