We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: 11.435 the number 2 in spanish over and over then just carrier  (Read 3112 times)

Offline ka1iic

  • Hero Member
  • *****
  • Posts: 903
  • Troy, Ohio
  • Troy, Ohio. 20m Vertical & low long wire E/W,
    • View Profile
    • Email
Hi all!

Just tuned to 11.434 MHZ at 1600 utc (march 30, 2013)and heard the number 2 repeated over and over for about 3 minutes then just a carrier...  Hold on... there is a call up going on right now...  1608 utc  much weaker than normal...

73
vince ka1iic
73 Vince
KA1IIC

"If you can't be anything, you can at least be annoying"

Troy, Ohio. 20m Vertical & low long wire E/W, Yaesu FT-187ND, SDRplay 2, Ratt Shack 2 meter rig, and other little bits of electronics I'm not talking about, homebrewed and otherwise... so there bleech!

Offline desmoface

  • Sr. Member
  • ****
  • Posts: 477
  • NE Ohio
    • View Profile
    • Email
Re: 11.435 the number 2 in spanish over and over then just carrier
« Reply #1 on: March 30, 2013, 1618 UTC »
HM01?

Steve
Kenwood TS-870SAT
Full Wave 80 Meter Horizontal Loop ~ 260 Ft Long
Pse qsl to Kb8viv @ yahoo . com
NE Ohio

Offline Token

  • Global Moderator
  • DX Legend
  • *****
  • Posts: 2118
    • View Profile
Re: 11.435 the number 2 in spanish over and over then just carrier
« Reply #2 on: March 30, 2013, 1627 UTC »
Just another fine bit of radio operations by Pedro.  Not an unheard-of error.  After it cleared HM01 took up its regular operation.

T!
T!
Mojave Desert, California USA

Offline ka1iic

  • Hero Member
  • *****
  • Posts: 903
  • Troy, Ohio
  • Troy, Ohio. 20m Vertical & low long wire E/W,
    • View Profile
    • Email
Re: 11.435 the number 2 in spanish over and over then just carrier
« Reply #3 on: March 30, 2013, 1635 UTC »
I think (heh) the machine got 'stuck' or they were using it to tune up the transmitter...  but it did turn out to be HM01...

Propagation is really bad today... good signal when it started but now they are way down in the muddy QRN...

73
vince
73 Vince
KA1IIC

"If you can't be anything, you can at least be annoying"

Troy, Ohio. 20m Vertical & low long wire E/W, Yaesu FT-187ND, SDRplay 2, Ratt Shack 2 meter rig, and other little bits of electronics I'm not talking about, homebrewed and otherwise... so there bleech!