We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL  (Read 470 times)

Offline Skipmuck

  • Global Moderator
  • Marconi Class DXer
  • *****
  • Posts: 12119
    • View Profile
    • Email
Thank you NAPRS! I love the graphics on this gem of an eQSL!

QSL's to poorbrookking >at< aol.com are greatly appreciated! All reception and postings using My radio, My antenna, and generally in real time(excluding posting of SSTV images!).
QTH:Springfield, MA
JRC NRD-515 with 43 meter half wave dipole into MFJ 949E Versa Tuner: also Grove SP-200 & SONY 2010's

Offline hsmith77

  • Marconi Class DXer
  • ********
  • Posts: 5786
    • MSN Messenger - h.smith77@charter.net
    • View Profile
    • Email
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #1 on: April 28, 2023, 0045 UTC »
Same received here. Thanks NAPRS
Harry L. Smith
Springfield,Oh.
JRC 535D Perseus SDR   MFJ 959C Tuner /Pre Amp. JRC 545 
RF  Systems MK2 antenna
Grundig G3 / G4000a / 400
QSL to h.smith77@charter .net

Offline clobdell

  • Global Moderator
  • DXing Phenomena
  • *****
  • Posts: 4229
  • Massachusetts
    • View Profile
    • Email
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #2 on: April 28, 2023, 0140 UTC »
Same! Thanks Dick Pistek!
Receiver: Eton E1, JRC NRD-525, 535 and 545, Icom IC-7300
Aerial: MFJ G5RV dipole
near Lowell Massachusetts - Gateway To The Merrimack Valley.
All loggings are from my QTH with my equipment unless stated otherwise.
QSL to: crlobdell1@gmail.com or
Box 80146, Stoneham, MA 02180
Amateur Radio Station: KC1IUK

Offline Pravotorov

  • Sr. Member
  • ****
  • Posts: 332
  • Zaporizhzhya, Ukraine
    • View Profile
    • Email
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #3 on: April 28, 2023, 0151 UTC »
I received the same eQSL. Many thanks
Please send me your QSL-card.
Kostiantyn Pravotorov
kostiantynpravotorov67@yahoo.com or kostiantynpravotorov@aol.com

Offline myteaquinn

  • Marconi Class DXer
  • ********
  • Posts: 5650
    • View Profile
    • Email
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #4 on: April 28, 2023, 0156 UTC »
Also received the same card. Thank you for both the broadcast and the QSL.
Northeast Ohio
Now using Shazam for song identification
myteaquinn@yahoo.com

Offline Bali_Frank

  • Marconi Class DXer
  • ********
  • Posts: 6956
    • View Profile
    • Email
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #5 on: April 28, 2023, 0157 UTC »
I received the same. Thank you
A German living in Bali / Indonesia
I use WebSDR’s
please QSL to: fschuettig_dx1@yahoo.com

Offline Molvania Poacher

  • DXing Phenomena
  • *******
  • Posts: 3640
  • New Hampshire
    • View Profile
Re: WORK (Workers Operating Radio Knobs) re-broadcast via NAPRS eQSL
« Reply #6 on: April 30, 2023, 1927 UTC »
Received one of these too. Love the time card theme. Thanks NAPRS!

MP
All reception from this location, radio and antenna.
QTH New Hampshire (70 miles north of Boston).
Tecsun S-8800 and Kenwood R-2000, with about 135 feet of wire thrown up in the trees.
eQSLs most appreciated to molvaniapoacher@gmail.com.