cool new topic - "Black Arts"
- (with a beer in hand) this is me ! !
A few weeks ago I thought of getting back into it, to change
The Guerrilla tx to be a little more simple and reliable to make,
and easier to get parts, by walking into a
Radio Shack.
- to make the oscillator with a 2N3906 PNP transistor
- to use Radio Shack p/n 273-102 100 micro-Henry inductors,
at $1.49 each, take the wire off, break them in half to
make 2 inductors out of each.
- and trimmed for operation using 13.8 volts as the supply
and operation around 7 MHz.
I used to get emails about "collecting parts" to build it, and now
I read these posts about the inductor problems.
But good to read that others have made it work.
So yesterday while it was so hot outside down here in the Gulf Coast,
I went at it in my cool air conditioned lab, and easily got a tunable
5 to 10 watts of RF. But did not modulate it yet.
So will fine tune and see what is best here, and will post it.
Those that built it with that last fickle RF transformer output stage
can easily change it to this one, to easily get 7 or so watts out.
the goal here in KISS ! ! ! !
http://www.angelfire.com/de/RadioAnarchy/