We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: HM01 11635 KHZ 2100 UTC 09/23/2013 low audio  (Read 1600 times)

Offline ka1iic

  • Hero Member
  • *****
  • Posts: 903
    • Troy, Ohio
  • Troy, Ohio. 20m Vertical & low long wire E/W,
    • View Profile
    • Email
HM01 11635 KHZ 2100 UTC 09/23/2013 low audio
« on: September 23, 2013, 2116 UTC »
Hi Folks,

Listening to HM01 11635 KHZ 2100 UTC 09/23/2013 with very low audio but a strong S9++ signal.

The modulation is just about at the noise level in-fact I have to listen in USB to really hear anything at all.

Sounds like the transmitter blew the modulation output stage and only the driver stage leakage is modulating the signal. ;-)

Someone is asleep at the switch again it seems... par for the course for that lot ehhh?

Yesterday I listened on this same frequency and time and nothing heard at all except the carrier.  It's a wonder their people ever get their messages...  works for me <heh>

Have a good day and a better tomorrow!

73 Vince
KA1IIC
-.-   -.
Logged
73 Vince
KA1IIC

"If you can't be anything, you can at least be annoying"

Troy, Ohio. 20m Vertical & low long wire E/W, Yaesu FT-187ND, SDRplay 2, Ratt Shack 2 meter rig, and other little bits of electronics I'm not talking about, homebrewed and otherwise... so there bleech!

Offline ssfahrer

  • Jr. Member
  • **
  • Posts: 21
    • View Profile
    • Email
Re: HM01 11635 KHZ 2100 UTC 09/23/2013 low audio
« Reply #1 on: December 06, 2013, 2347 UTC »
I've noticed that for ALL the transmissions of the Cuban Lady (I have regularly monitored them at 5855 at 05 UT and 9330 at 07 UT, so I can speak a bit about those frequencies). It is possible that the machine that generates the voice is weak -- and is so especially on the number 3 --AKA "tres" (after all, they are apparently 30+ years old -- see the videos of Peter Staal for more on those machines which were apparently produced in the former East Germany: http://www.youtube.com/user/PeterStaal01?feature=watch)....
Logged
Pages: [1]
« previous next »