We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: Small PCB Orders  (Read 4016 times)

Offline ChrisSmolinski

  • Administrator
  • Marconi Class DXer
  • *****
  • Posts: 31105
  • Westminster, MD USA
    • View Profile
    • Black Cat Systems
Small PCB Orders
« on: September 25, 2010, 1236 UTC »
Has anyone here used http://batchpcb.com/ ?  I need to get some small runs of boards made.

On a related note - they let you sell your designs through them. Might be an interesting way for enterprising individual who has designed a grenade type transmitter to make the board available.
Chris Smolinski
Westminster, MD
eQSLs appreciated! csmolinski@blackcatsystems.com
netSDR / AFE822x / AirSpy HF+ / KiwiSDR / 900 ft Horz skyloop / 500 ft NE beverage / 250 ft V Beam / 58 ft T2FD / 120 ft T2FD / 400 ft south beverage / 43m, 20m, 10m  dipoles / Crossed Parallel Loop / Discone in a tree

Offline Seamus

  • Full Member
  • ***
  • Posts: 140
    • View Profile
    • Email
Re: Small PCB Orders
« Reply #1 on: September 25, 2010, 1243 UTC »
I have not used them, but I have heard good things about them, and know people are generally happy with their service (haven't heard of anyone decrying how horrible they were or anything like that).

I would also be very interested in seeing a transmitter PCB made available.  For educational purposes only, of course. ;)

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: Small PCB Orders
« Reply #2 on: September 25, 2010, 1619 UTC »
I've always used:  http://www.apcircuits.com/

They have on-line calculation of cost, they offer a bare-bones "prototype" service (no extras) as well as their upscale full silkscreen and solder-masked boards using different laminates (GHz rated stuff) ...

For their prototype service, they have a restricted set of drill bits and non-solder-masked and no silkscreen (keeps costs down) and like a two-day turnaround with status updates.

Quote
Basic Prototype data received after 11:00 AM Mountain (13:00 Eastern) will be queued for formatting the next business day and ship the business day following that.

I like using them because there is no 'human' involved negotiating price, they have on-line price calculator:

   http://www.apcircuits.com/ap/calculator

When ready to order, just FTP in the files zipped up or use their xfer utility to send in the Gerbers with their order form.


Added:

I hesitate to mention this, but, I've got a friend who operates a small company with Juki 'pick and place' (SMT placement line) equipment ...


Update: Looks like setup charge is a little higher for APCircuits but per sq inch is a little lower and of course the turn around time for the batch guys could be like 20 days vs 2 or 3 for APCircuits ... there are other trade-offs, as the batch guys will do silk-screening and soldermask (I think) for that 2.50 a sq inch - that's not bad ... good find.

« Last Edit: September 25, 2010, 1847 UTC by SW-J »
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

cmradio

  • Guest
Re: Small PCB Orders
« Reply #3 on: September 25, 2010, 2240 UTC »
I like using them because there is no 'human' involved negotiating price, they have on-line price calculator:

http://www.apcircuits.com/ap/calculator


OUCH!!!!! :o

Check out some ads for PCB places on DIY forums... you'll find PCB places that charge 1/3 for the same thing (seriously... not junk, good 1.5mm FR4 stuff w/soldermask & silkscreen, double sided plated through holes).

Peace!

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: Small PCB Orders
« Reply #4 on: September 25, 2010, 2300 UTC »
I like using them because there is no 'human' involved negotiating price, they have on-line price calculator:

http://www.apcircuits.com/ap/calculator


OUCH!!!!! :o

Check out some ads for PCB places on DIY forums... you'll find PCB places that charge 1/3 for the same thing (seriously... not junk, good 1.5mm FR4 stuff w/soldermask & silkscreen, double sided plated through holes).

Peace!

2-day turnaround, under 2.50 (this figure look more like 1.30 in 100 unit board qtys) a sq inch? I've looked in the past ...

Add: Their name (apcircuits) keeps popping up when searching for ppl who want (and have used them for) small qtys of cheap PCBs made:

  http://www.sxlist.com/techref/pcbfabs.htm
  http://web.media.mit.edu/~wad/pcbfab.html
  http://chiphacker.com/questions/2829/recommended-pcb-houses-assemblers


A "user-submitted list" of PCB manf's:

  http://www.opencircuits.com/PCB_Manufacturers



Edit: Ongoing to refine some info like APC's cost per sq inch and setup charge
« Last Edit: September 25, 2010, 2348 UTC by SW-J »
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m