We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: Electronic Dog Fence Wire as Antenna  (Read 5534 times)

bandarr3000

  • Guest
Electronic Dog Fence Wire as Antenna
« on: October 29, 2017, 2117 UTC »
Hi,

I'm going to replace my current antenna wire (currently 14 gauge, only 45 feet long) with a longer wire about 170 feet long.  Five hundred feet of electronic dog fence wire, solid 20 gauge, is about $18.  Has anyone ever used this kind of wire for an antenna?  Can I expect it to hold up in the weather, including ice and snow?  It's so cheap that it seems too good to be true.

Thanks,

Dan Barr

Offline ChrisSmolinski

  • Administrator
  • Marconi Class DXer
  • *****
  • Posts: 31105
  • Westminster, MD USA
    • View Profile
    • Black Cat Systems
Re: Electronic Dog Fence Wire as Antenna
« Reply #1 on: October 29, 2017, 2129 UTC »
What is it made out of?

FWIW, I use #16 insulated hookup wire for my antennas. I can get 500 ft spools on eBay for about $20 shipped.
Chris Smolinski
Westminster, MD
eQSLs appreciated! csmolinski@blackcatsystems.com
netSDR / AFE822x / AirSpy HF+ / KiwiSDR / 900 ft Horz skyloop / 500 ft NE beverage / 250 ft V Beam / 58 ft T2FD / 120 ft T2FD / 400 ft south beverage / 43m, 20m, 10m  dipoles / Crossed Parallel Loop / Discone in a tree

bandarr3000

  • Guest
Re: Electronic Dog Fence Wire as Antenna
« Reply #2 on: October 29, 2017, 2139 UTC »
The description simply says copper with polyethelene jacket. 

Thanks for the tip about the hookup wire on ebay.  Seems like I looked everywhere but there. 

Offline BoomboxDX

  • Hero Member
  • *****
  • Posts: 804
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #3 on: October 30, 2017, 0533 UTC »
My guess is if it is used as a dog fence, it should hold up in weather.
An AM radio Boombox DXer.
+ GE SRIII, PR-D5 & TRF on MW.
The usual Realistic culprits on SW (and a Panasonic).

bandarr3000

  • Guest
Re: Electronic Dog Fence Wire as Antenna
« Reply #4 on: October 31, 2017, 0049 UTC »
Thanks to both of you.  I found some 16 gauge wire on eBay. 

Offline IQ_imbalance

  • Sr. Member
  • ****
  • Posts: 345
  • Central MD
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #5 on: November 05, 2017, 1618 UTC »
I always wondered about using electric fence wire...or even better, the stuff that's got wire woven into a nylon rope.  I have had some success with temporary antennas using magnet wire and plastic thumbtacks....
LOG/NE-SW unterminated BOG/DJ-130/800Mhz Yagi
AFEDRI SDR-Net ICF-SC1 SDS-200 various RTL-SDR
Central MD

Offline Ed H

  • Full Member
  • ***
  • Posts: 131
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #6 on: March 16, 2018, 0346 UTC »
Both my "random wire dipole" and long wire are made with dog fence wire. It works perfectly, and has held up well. The dipole, in particular, has been a great on HF in reception of 22 m beacons. For reception, almost anything will do, it just has to stay in the air.

Offline RobRich

  • DX Legend
  • ******
  • Posts: 1721
  • Tampa, FL USA
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #7 on: March 16, 2018, 0758 UTC »
Naturally copper is preferred, but I have had receive antennas built with aluminum, stainless steel, and even "unknown" wire. Whatever is available, conductive, and inexpensive; again, assuming you are not transmitting wattage into it. A good example is my loop-on-ground being built out of coax because I already have lots of RG-6 available.

In recent times I have been using 20ga stranded copper speaker wire for basic antennas, ground-level radials, etc. Around $40-$45 shipped for an 1000' spool, which makes 2000' of wire.
« Last Edit: March 16, 2018, 0800 UTC by RobRich »
Tampa, FL USA | US Map Grid EL88
Airspy HF+ Discovery | KiwiSDR 2 | 2x Msi2500 Msi001 | 2x RTL-SDR V3 + NE602 | 2x RTL-SDR V4
148' Loop-on-Ground | 31' Vertical | 18' End-Fed Vertical | 9' NCPL | PA0NHC MiniWhip

Offline IQ_imbalance

  • Sr. Member
  • ****
  • Posts: 345
  • Central MD
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #8 on: April 22, 2018, 0132 UTC »
Just discovered an invisible pet fence installed by the previous owners of my house. I'm going to check for continuity, but if its still in one piece I'm going to see what happens when used as a "Loop UNDER ground" antenna....
LOG/NE-SW unterminated BOG/DJ-130/800Mhz Yagi
AFEDRI SDR-Net ICF-SC1 SDS-200 various RTL-SDR
Central MD

Offline Josh

  • DXing Phenomena
  • *******
  • Posts: 4322
    • View Profile
Re: Electronic Dog Fence Wire as Antenna
« Reply #9 on: April 22, 2018, 1642 UTC »
The bigger an underground ant is the more rf it can pick up. That being said, when tests were done on in ground dipoles they needed to be shortened to obtain on frequency resonance compared to above ground dipoles at the same freq. This should turn out to be a dandy antenna, and hurricane proof. When that hurricane swept through Homestead AFB it took their wullenweber out to sea never to be seen again, including the central building. Nothing above ground was left of their flr9 or frd10 or whatever it was.
We do not encourage any radio operations contrary to regulations.