We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: FCC Public Notice 4126 dated August 12, 1988  (Read 2795 times)

Offline NJQA

  • Sr. Member
  • ****
  • Posts: 323
  • Virginia
    • View Profile
FCC Public Notice 4126 dated August 12, 1988
« on: November 21, 2018, 1637 UTC »
So I am on the FCC ULS web site, looking at HF station licenses in the Industrial/Business Pool.   The frequency authorizations on licenses often look like this: "000007.30000000-000008.10000000".  This seems to authorize any frequency between 7.3 MHz and 8.1 MHz.

However, at the very bottom of the license are these words in the section that says Waivers/Conditions:
"Only those frequencies identified by PN 4126 released August 12, 1988 are available for use in the authorized frequency bands."

I spent some time searching for this Public Notice but can't seem to find a copy on line.  Before I try writing to the FCC, does anyone have a copy of this Public Notice?

Offline ThElectriCat

  • Full Member
  • ***
  • Posts: 113
  • Hillsboro OR
    • View Profile
Re: FCC Public Notice 4126 dated August 12, 1988
« Reply #1 on: November 21, 2018, 1745 UTC »
Unfortunately, FCC notices more than a couple years old are often difficult to find. When my radio stations made the switch to online documentation, we had to find some stuff only a year old (which we SHOULD have already had)
I notice that pretty much all services search like this in ULS unless they have only a few fixed frequencies. Try looking up a ham radio callsign. there arent even frequencies listed. just a reference to part95.
In another life, I could have been a telephone engineer.

Offline Exo

  • Full Member
  • ***
  • Posts: 198
  • Coast of northern California
  • HF aficionado.
    • View Profile
Re: FCC Public Notice 4126 dated August 12, 1988
« Reply #2 on: November 22, 2018, 0231 UTC »
Here's a Bellcore document that contains some of the PN 1426 information on page 18.
http://www.ridethemindway.com/phones/Disk_2/Bell_System_Practices_500-000-001_to_999-999-999/940-500-100_I1.pdf


See below list for a partial frequency listing from FCC Public Notice 4126 Aug 12, 1988.

Frequency Band (MHz)
Frequencies (MHz)
USB_Carrier/Assigned
     
2.19400 – 2.49500
2.28900/2.29040
2.29200/2.29340
2.39500/2.39640
2.39800/2.39940
     
3.15500 – 3.40000
3.17000/3.17140

4.43800 – 4.65000
4.53860/4.54000
4.54860/4.55000
4.57500/4.57640
4.61050/4.61190
4.61350/4.61490
4.63450/4.63590
4.63750/4.63890
4.64700/4.64840

5.00500 – 5.45000
5.06160/5.06300
5.06760/5.06900
6.80610/6.80750
6.85510/6.85650
6.85810/6.85950
     
6.76500 – 7.00000
6.86110/6.86250
6.88510/6.88650
6.88810/6.88950

7.30000 – 8.10000
7.48010/7.48150
7.48310/7.48450
7.54910/7.55050
7.55210/7.55350
7.55510/7.55650
7.55810/7.55950
7.55910/7.56050
7.56210/7.56350
7.69710/7.69850
« Last Edit: November 22, 2018, 0233 UTC by Exo »
Exo
HF aficionado. On the coast of northern California.
Various receivers, transceivers, and broadband antennas.
kiwiSDR receiver on private LAN for multi-freq HF monitoring.

Offline KaySeeks

  • DX Legend
  • ******
  • Posts: 1246
  • Quebec. Vive la différence.
    • View Profile
Re: FCC Public Notice 4126 dated August 12, 1988
« Reply #3 on: November 22, 2018, 1848 UTC »
Frequency Band (MHz)
Frequencies (MHz)
USB_Carrier/Assigned

"USB Carrier" Hmmmmm.

And the "assigned" column looks more like it ought to be the USB and vice-versa, assuming they are assigning by carrier frequencies.

I realize that you are just the messenger but...
Just somebody with a radio, a computer and a pair of headphones...

Offline Exo

  • Full Member
  • ***
  • Posts: 198
  • Coast of northern California
  • HF aficionado.
    • View Profile
Re: FCC Public Notice 4126 dated August 12, 1988
« Reply #4 on: November 22, 2018, 1921 UTC »

"USB Carrier" Hmmmmm.
And the "assigned" column looks more like it ought to be the USB and vice-versa, assuming they are assigning by carrier frequencies.
I realize that you are just the messenger but...

The list is correct, and it is uses the common designations.

The "Assigned Frequency" is the center of the 2.8 kHz bandwidth channel.
With Upper Sideband, the suppressed carrier frequency is lower than the assigned frequency.
Assigned frequency is 1.4 kHz above the USB phantom carrier.
2.8 kHz bandwidth Upper Sideband voice.
« Last Edit: November 22, 2018, 1945 UTC by Exo »
Exo
HF aficionado. On the coast of northern California.
Various receivers, transceivers, and broadband antennas.
kiwiSDR receiver on private LAN for multi-freq HF monitoring.

Offline R4002

  • DXing Phenomena
  • *******
  • Posts: 2994
    • View Profile
    • R4002 - YouTube Videos
Re: FCC Public Notice 4126 dated August 12, 1988
« Reply #5 on: November 26, 2018, 1859 UTC »
In other words, the "carrier" frequency is what your radio display will show.  Add 1.4 kHz to get the "assigned" frequency.  This is common practice for the FCC with their licenses.  For example, a marine coast station licensed for 2182 kHz will show 2183.4 kHz on their license as the "assigned" frequency, even though all radios would show that as 2182 kHz, USB mode. 
U.S. East Coast, various HF/VHF/UHF radios/transceivers/scanners/receivers - land mobile system operator - focus on VHF/UHF and 11m

 

HFUnderground T-Shirt
HFUnderground Garden Flag
by MitchellTimeDesigns