Author Topic: SAQ Grimeton Radio 17.2 kHz 1045 and 1245 UTC 1 Jul 2018  (Read 123 times)

Offline ulx2

  • Sr. Member
  • ****
  • Posts: 393
    • View Profile
    • My DX blog
17.2 kHz - 1 Jul 2018 - 10.45 UTC:


17.2 kHz - 1 Jul 2018 - 12.45 UTC:


RX:  PC sound card + Spectrum Lab V2.93 b4
ANT: 80 mb dipole connected via simple low-pass filter
« Last Edit: July 01, 2018, 1556 UTC by ulx2 »
LOC: Kyiv, Ukraine
RX: Degen DE-1103 portable
ANT1: Two phased external wires (2x10 meters approx.)
ANT2: Long wire (25 meters)
ANT3: Homemade M0AYF wide bandwidth active loop
ACC: Homemade passive preselector, homemade phasing device

http://ulx2.byethost24.com/

Offline WA4FHY

  • Full Member
  • ***
  • Posts: 135
    • View Profile
    • Email
Re: SAQ Grimeton Radio 17.2 kHz 1045 and 1245 UTC 1 Jul 2018
« Reply #1 on: July 07, 2018, 1831 UTC »
I also heard the 1045 xmission - but I had to
"cheat" by using the websdr at University Twente.
However, I am happy to have heard it. Now, if I
could only receive it at my home QTH...
SDR-IQ / IC-R70 / IC-735 / FT-817ND, 5 band vertical & 4 position antenna switch
Near Music City, TN

Offline ulx2

  • Sr. Member
  • ****
  • Posts: 393
    • View Profile
    • My DX blog
Re: SAQ Grimeton Radio 17.2 kHz 1045 and 1245 UTC 1 Jul 2018
« Reply #2 on: July 07, 2018, 2359 UTC »
Now, if I could only receive it at my home QTH...

There are several marks on the territory of USA on their Listeners’ Reports Interactive Map (even in Alaska):

http://alexander.n.se/listeners-reports-interactive-map/?lang=en

So, it's possible. Good luck!
LOC: Kyiv, Ukraine
RX: Degen DE-1103 portable
ANT1: Two phased external wires (2x10 meters approx.)
ANT2: Long wire (25 meters)
ANT3: Homemade M0AYF wide bandwidth active loop
ACC: Homemade passive preselector, homemade phasing device

http://ulx2.byethost24.com/