We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: DDS Signal Generator PCB  (Read 3509 times)

Offline CoolAM Radio

  • Hero Member
  • *****
  • Posts: 981
  • Netherlands
  • CoolAM Radio... So Cool... that it's Hot!
    • View Profile
    • CoolAM Radio - ShortWave 6735
    • Email
DDS Signal Generator PCB
« on: March 06, 2019, 1521 UTC »


For Sale  -  DDS SIGNAL GENERATOR PRINT

For those interested

Check website Shortwave Combination Holland
@
http://www.swcholland.com/zendapparatuur/


André
#CoolAMRadio
the Netherlands
Make your dream a reality...
                Then go to sleep...
                        Have another dream and do it again!

                 Sweet dreams!!!

http://jingleproductions.coolam.nl
   Transmitters Do It On Air!!!
::::::::::::::::::::::::::::::::::::::

Offline Radio Station

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
Re: DDS Signal Generator PCB
« Reply #1 on: March 11, 2019, 1519 UTC »
The AD9850 (seen in the photo of this DDS ) and AD9851 DDS boards off eBay do not use a TCXO oscillatior time base so they will drift around a bit. If you use it for AM that's fine. If you want high stablity I would change it to a .1 PPM TCXO this can be easily added to the AD9851 30 MHz time base. You can buy the TCXO off eBay. The DDS I designed is better than .01 Hz stability.
Radio station

Offline Teotwaki

  • DXing Phenomena
  • *******
  • Posts: 3111
  • California
    • View Profile
    • My adventures are at Sun To The North
Re: DDS Signal Generator PCB
« Reply #2 on: May 08, 2019, 1320 UTC »
60 Euros or roughly $68 US

Specs:

• Frequency Range 100KHz to 30MHz

• Steps: 1Hz 1KHz 100KHz en 1MHz.

•  12 volt (no current draw supplied but can't be much)

LARGE Photo from their site

Jim
NRD-525, Elecraft KX3 and Elecraft PX3 Spectrum Display
76' end fed long wire & 66' off-center fed dipole for 10/20/40 meters
Orange County, SoCal, The better half

 

HFUnderground T-Shirt
HFUnderground T-Shirt
by MitchellTimeDesigns