We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissable in your locale.

Author Topic: Channel Marker on 14.317?  (Read 275 times)

Offline KM0NAS

  • Jr. Member
  • **
  • Posts: 36
  • Karma: +0/-0
  • Minnesota
    • View Profile
Channel Marker on 14.317?
« on: November 13, 2020, 2019 UTC »
Any else hearing a repeated beeping on 14.317 mhz?

I am hearing it at 20:18 UTC. (Update: started to fade about 20:50 and by 20:51 UTC was no longer audible or had stopped)

Sounds a bit like a channel marker? Not familiar with any that would be on this frequency.

Just a repeating tone over and over. About 1 sec on 1 sec off. Seems to repeat every minute. There is a slight pause once per minute. 37 pips per min.

https://youtu.be/rNHTEGI1FHM
« Last Edit: November 13, 2020, 2052 UTC by KM0NAS »
*KM0NAS*
Yaesu FT-891
Kenwood TS-570D
Soft66RTL2
40 meter dipoles @ 40' height
20 meter dipoles @ 40' height
10 meter vertical @ 16' height
Beacon MN on 13562.8

Offline KM0NAS

  • Jr. Member
  • **
  • Posts: 36
  • Karma: +0/-0
  • Minnesota
    • View Profile
Re: Channel Marker on 14.317?
« Reply #1 on: November 14, 2020, 0001 UTC »
Sorry, I had video marked as private. Fixed now. 
*KM0NAS*
Yaesu FT-891
Kenwood TS-570D
Soft66RTL2
40 meter dipoles @ 40' height
20 meter dipoles @ 40' height
10 meter vertical @ 16' height
Beacon MN on 13562.8

Offline syfr

  • Sr. Member
  • ****
  • Posts: 493
  • Karma: +9/-1
    • View Profile
Re: Channel Marker on 14.317?
« Reply #2 on: January 10, 2021, 0111 UTC »
Strong beacon signal. Is it still there?
Kiwsdr x 2. TenTec Paragon/NRD535