We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: Federal Labor Party in Australia to bring back shortwave if elected  (Read 1580 times)

Online Ct Yankee

  • Marconi Class DXer
  • ********
  • Posts: 6978
  • From the People's Radio Republic of Durham, CT
    • View Profile
    • Email
Federal Labor Party in Australia to bring back shortwave if elected
« on: November 19, 2018, 2232 UTC »
Logged
Tecsun H501x (broadcast received on this unless noted), Zenith T/O G500, Zenith T/O Royal 7000, Emerson AR-176, Zenith 8S154, T/O 7G605 (Bomber), Tecsun PL-600, Tecsun PL-880, Zenith 5S320, Realistic DX 160 using 40 feet of copper wire.  With apologies to Senator Gramm for his thoughts on firearms, "I have more radios than I need but not as many as I want."
QTH:  Durham, Connecticut (rural setting, 15 miles north of Long Island Sound)
qsl please to:  jamcanner@comcast.net  (Thank you)

Offline jFarley

  • Marconi Class DXer
  • ********
  • Posts: 5922
    • near Chicago
    • View Profile
    • Email
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #1 on: November 20, 2018, 0056 UTC »
Bring back Humpty Doo 5030 !
Logged
Joe Farley, Near Chicago
SDR-IQ / R8 / R7
Remote Resonant Loops for HF and LF / ALA 1530
Active 60" Whip / PA0RDT
QSLS appreciated to:    jfarley44@att.net

Offline Looking-Glass

  • DX Legend
  • ******
  • Posts: 1156
    • Condobolin, NSW, Australia
  • "Old fashioned DXer, no offshore computer rxing!"
    • View Profile
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #2 on: November 22, 2018, 0452 UTC »
Past experience with Australian politicians is all vigour and promise when in opposition, when elected their memories suddenly fail.  Promise? What promise?  Cannot recall that promise... ::)

I will believe it when I actually hear Radio Australia back on air, don't hold your breath for it though... 8)
Logged
Condobolin, NSW.

Grid Square:  QF37ub

Yaesu FT-1000D, Yaesu FT-2000D, ICOM IC-736 HF/50MHz, ICOM IC R75 & Tecsun S-2000 to 450 feet of wire, 27MHz 1/2 wave CB antenna converted to 21MHz & a multi band vertical of dubious reliability.

Offline MDK2

  • Marconi Class DXer
  • ********
  • Posts: 6247
    • Denver, CO
    • View Profile
    • My radio reception videos
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #3 on: November 22, 2018, 1554 UTC »
Quote from: Looking-Glass on November 22, 2018, 0452 UTC
Past experience with Australian politicians is all vigour and promise when in opposition, when elected their memories suddenly fail.  Promise? What promise?  Cannot recall that promise... ::)

I will believe it when I actually hear Radio Australia back on air, don't hold your breath for it though... 8)

I think they're talking about restoring only ABC Northern Territories, not RA.
Logged
Denver, CO.
SDRPlay RSPdx & RSP2pro, Airspy Discovery HF+, Icom IC-7100, Grundig Satellit 750, Realistic DX-300, Tecsun PL-600.
MLA-30 active loop, G5RV dipole.
eQSLs appreciated wickerjennie at gmail

Offline Looking-Glass

  • DX Legend
  • ******
  • Posts: 1156
    • Condobolin, NSW, Australia
  • "Old fashioned DXer, no offshore computer rxing!"
    • View Profile
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #4 on: November 22, 2018, 2126 UTC »
Same response...all full of gusto and hope, yet fail to deliver when elected.  The cost of reactivating these services will be huge, also I heard that some of the transmitters were sold off to either African or Asian buyers.

National or International services Radio Australia and Radio National on SW are gone for good, like the Australian railway system, forever going backwards but seldom forward.  Vale Radio Australia in all its forms, regional or international... ;D
Logged
Condobolin, NSW.

Grid Square:  QF37ub

Yaesu FT-1000D, Yaesu FT-2000D, ICOM IC-736 HF/50MHz, ICOM IC R75 & Tecsun S-2000 to 450 feet of wire, 27MHz 1/2 wave CB antenna converted to 21MHz & a multi band vertical of dubious reliability.

Offline Josh

  • DXing Phenomena
  • *******
  • Posts: 4322
    • View Profile
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #5 on: November 23, 2018, 1900 UTC »
"I'll say anything to get elected!!!"
Logged
We do not encourage any radio operations contrary to regulations.

Offline Looking-Glass

  • DX Legend
  • ******
  • Posts: 1156
    • Condobolin, NSW, Australia
  • "Old fashioned DXer, no offshore computer rxing!"
    • View Profile
Re: Federal Labor Party in Australia to bring back shortwave if elected
« Reply #6 on: November 23, 2018, 2310 UTC »
One must also keep in mind that servicing the outback regions of Australia is serving remote communities and thus few votes at the ballot box, the pollies here like to cover the big ticket items that attract major capital cities and regional city voters, hence large population centres.

The rural areas of Australia have always received the least amount of attention come election time.

However, yes, it would be great to have those services re-instated but hardly likely is my guess, despite all the Pork Barrel efforts by the opposition to temp votes at the ballot box... ;D

Hence MW station 4KZ near Innisfail running a relay transmission on 5.055MHz AM, they can see a need to fill the void albeit on a easily established set up.

« Last Edit: November 23, 2018, 2313 UTC by Looking-Glass »
Logged
Condobolin, NSW.

Grid Square:  QF37ub

Yaesu FT-1000D, Yaesu FT-2000D, ICOM IC-736 HF/50MHz, ICOM IC R75 & Tecsun S-2000 to 450 feet of wire, 27MHz 1/2 wave CB antenna converted to 21MHz & a multi band vertical of dubious reliability.
Pages: [1]
« previous next »
 

HFUnderground T-Shirt
HFUnderground Garden Flag
by MitchellTimeDesigns