We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: UNID 6950 AM 0650 UTC 30 MAR 2024  (Read 353 times)

Online TheHappyWanker

  • DX Legend
  • ******
  • Posts: 1062
    • W PA & OTR
  • After 25 yrs I find myself back to Pirate Radio???
    • View Profile
    • Email
UNID 6950 AM 0650 UTC 30 MAR 2024
« on: March 30, 2024, 0651 UTC »
S9+10 AM Nice Audio  WW2 ERA Music
0659 UTC S9 +10 Blues Some Rocking Tonight
0703 UTC Dunking Bagel Tune?
0712 78 RPM Turntable. now slow speed voice variation. Neat!
0716  UTC OTA Neat show! Recording to follow here. Pls EQSL. Thx THW
https://drive.google.com/file/d/1WIbssnjX079pXLXS3et8blXRJoFSIPGA/view?usp=drive_web
« Last Edit: March 30, 2024, 2054 UTC by TheHappyWanker »
Logged
IC-7300,2 R-390A, SP600, SX 62A, SX71, NC173, Antennas: Butternut HF9V, 2 EFHW 80-10 120' 1 N/S 1 E/W, EFWH 40-10, 62' E/W, RX LOOP (.5-30) with Rotor.  RSPdx & Duo Rice Box used when traveling with Chinese loop. If so desired a EQSL can go to TheHappyWanker@Gmail. Thx "Just because your not paranoid doesn't mean someone isn't out to get you..." MX ID is my Old Ears and Memory. If I cant copy here it isn't DX! The Web Stuff isn't DX... OK its remote DX via the Electronic Ether...LOL All The gig DARPA brought us...

Offline Grumpy Grandpa

  • Sr. Member
  • ****
  • Posts: 338
    • FSM AR
    • View Profile
Re: UNID 6950 AM 0650 UTC 30 MAR 2024
« Reply #1 on: March 30, 2024, 0654 UTC »
"Dog Gone It" Donna Hightower @ tune-in 0652z
"Lyin' Woman Blues" Walter Brown  @ 0655
"Good Rockin' Tonight" Wynonie Harris @ 0658
Shortly after 0700, the buttons kicked in.
Gone @ 0716.

Great program of jump blues!
Hitting S20+ in to Fort Smith AR
offset=6950.112 drifting down

RSPdx/20x20 LOG + CCW loop kit
« Last Edit: March 30, 2024, 0716 UTC by Grumpy Grandpa »
Logged
QSL email addy: dagasque(at)hotmail.com
Thanks in advance!

Icom R71-A
RSP1A, RSPdx, Airspy HF+
Tecsun PL-880, Malachite V3 1.10D
W6LVP 1M active loop, KA7U 1M active loop
Cross Country Wireless active loop kit + various-sized LoGs
MLA30+ active loop
A good supply of corn chips
Probably a spiked iced tea somewhere close
Shazam is a frequent co-pilot

Offline canswl

  • Hero Member
  • *****
  • Posts: 529
    • Masset, BC
  • Thanks for the broadcast!
    • View Profile
    • Email
Re: UNID 6950 AM 0650 UTC 30 MAR 2024
« Reply #2 on: March 30, 2024, 0657 UTC »
About an S5 signal this late night into Masset, BC with Big Band music at 06:55 utc tune-in. 
Logged
Listening to the amazing world of radio since 1967
Victoria, BC CANADA and my remote site near Masset, BC
Perseus SDR with ALA 100LN and Flag antennae.  Beverages, ALA 100 and ALA1530 and DKAZ in Masset
eQSLs always appreciated to CANSWL@GMail.com

Offline TrueNorthSWL

  • Jr. Member
  • **
  • Posts: 34
    • Southwest BC, Canada
  • Vertical antenna 50 ft. Receiver IC7300.
    • View Profile
Re: UNID 6950 AM 0650 UTC 30 MAR 2024
« Reply #3 on: March 30, 2024, 0700 UTC »
0700: Carrier S5 direct, 6950.12. In the noise here.
0703: Good audio and peaking S5  on ve7av sdr.
« Last Edit: March 30, 2024, 0704 UTC by TrueNorthSWL »
Logged

Offline Ron Hunsicker

  • DX Legend
  • ******
  • Posts: 1357
    • View Profile
    • Email
Re: UNID 6950 AM 0650 UTC 30 MAR 2024
« Reply #4 on: April 01, 2024, 2050 UTC »
Via a recording.  The carrier appeared about 0640, followed immediately with "Seventh Son."  32 dB over the noise means AM should be okay here.  As reported, whole bunches of 1930's and 40's music.  The signal was not nearly as nice in Wyomissing as others reported where they were:  45343 early in the broadcast, but by 0652 it was 35342.  Never a hint of an ID.

Nice show, thanks,


Ron

The Elad showed 6950.15
« Last Edit: April 01, 2024, 2059 UTC by Ron Hunsicker »
Logged
Ron Hunsicker
Wyomissing, Pennsylvania 
ronhunsi at ptd.net
Elad FDM-S3, a dipole cut for 6955, a DX Engineering Amplified Vertical, and a Wellbrook with a rotator
Pages: [1]
« previous next »