We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: Preamplifier uses  (Read 6034 times)

Offline Antennae

  • Hero Member
  • *****
  • Posts: 648
  • CA, USA
    • View Profile
Preamplifier uses
« on: July 17, 2014, 0356 UTC »
I just got a cheap receiving preamplifier. Its a Palomar Engineers and goes from 1.8 - 50mhz.

Does anybody have experience with a preamplifier? It seems like it wouldn't do much on my skyloop because the noise would be amplified too.
California Coast
Antenna: random wire

Offline ChrisSmolinski

  • Administrator
  • Marconi Class DXer
  • *****
  • Posts: 31106
  • Westminster, MD USA
    • View Profile
    • Black Cat Systems
Re: Preamplifier uses
« Reply #1 on: July 17, 2014, 1233 UTC »
Personally, I am not a huge fan of pre-amps for HF. They can be very useful on VHF and above where background noise levels are low, especially relatively narrow band pre-amps with good noise figures.

Virtually all decent HF receivers are already more than sensitive enough. As you said, you're most likely just going to amplify the existing noise, plus add additional noise from the pre-amp.  I could possibly see some use on say 10 meters, but I'm doubtful there's any benefit on say 43 meters.
Chris Smolinski
Westminster, MD
eQSLs appreciated! csmolinski@blackcatsystems.com
netSDR / AFE822x / AirSpy HF+ / KiwiSDR / 900 ft Horz skyloop / 500 ft NE beverage / 250 ft V Beam / 58 ft T2FD / 120 ft T2FD / 400 ft south beverage / 43m, 20m, 10m  dipoles / Crossed Parallel Loop / Discone in a tree

Offline glimmer twin

  • DX Legend
  • ******
  • Posts: 1089
  • "I found my way to heaven , I did my time in hell"
    • View Profile
Re: Preamplifier uses
« Reply #2 on: July 17, 2014, 1634 UTC »
When I bought a bunch of radio stuff about a year ago one of the things I bought was a preamp/tuner thing from MFJ & it is fairly worthless. Exactly as Chris says. It sort of looks cool if you are into having knobs & stuff to fiddle with but as a practical matter......it sucks.
KCMO  Icom R 75 , SDR-IQ, Grundig Satellit 750 ,Tecsun PL 880, Tecsun PL660 , Tecsun PL380 & PL360  10 meter random wire  w/ RF systems MLB    Alpha Delta SWL DX sloper  
qsl   keithglimmer810@gmail.com

gentlemen,you can not fight in here, this is the war room

Offline BDM

  • Hero Member
  • *****
  • Posts: 566
  • S/E Michigan
    • View Profile
Re: Preamplifier uses
« Reply #3 on: July 17, 2014, 1947 UTC »
Has been my experience in the past also
Radios -- Perseus SDR // SDRPlay RSPdx // Icom IC-7300 // Tecsun PL-660 // Panasonic RF-5000A --Antennas-- Pixel Pro 1B loop - 82' fan-dipole at 40' - tuned MW/BCB 40" loop and 100' receive only dipole
-Brian--North of Detroit--MI-
1710/KHz the MW Pirate Clear Channel (not so much anymore "sigh")

Offline BoomboxDX

  • Hero Member
  • *****
  • Posts: 804
    • View Profile
Re: Preamplifier uses
« Reply #4 on: July 19, 2014, 0436 UTC »
I suppose if it has a sensitivity control, you could try it with it set low and see if it amplifies signals to a useful level, especially if you hear a weak one with problems due to fading, etc.

While it's true it could amplify noise, it will also amplify target signals as well.

I know there are high level DX HF rigs and ham rigs with built in pre-amplifiers, so there must be a reason for their use.
An AM radio Boombox DXer.
+ GE SRIII, PR-D5 & TRF on MW.
The usual Realistic culprits on SW (and a Panasonic).

Offline Antennae

  • Hero Member
  • *****
  • Posts: 648
  • CA, USA
    • View Profile
Re: Preamplifier uses
« Reply #5 on: July 19, 2014, 2347 UTC »
My controls are:
gain
delay
band
tune

I don't know what delay does.

I read that smallish receiving loops need a preamplifier. Is this the same kind of preamplifier that the loops use?
California Coast
Antenna: random wire

Offline BoomboxDX

  • Hero Member
  • *****
  • Posts: 804
    • View Profile
Re: Preamplifier uses
« Reply #6 on: July 20, 2014, 0641 UTC »
The only loops I use are for MW, and they're un-amplified, which seems fairly standard.

But I have heard of guys using amplified MW loops, and I've heard of amplified SW loops before -- usually indoor ones.

The "tune" and "band" controls imply that what you have is a sort of preselector, which is (to put it loosely, as I'm not a ham or radio expert) sort of like an amplified antenna tuner.

No idea what a 'delay' control would be for.

I'd try it at low gain, mainly on ultra weak signals you may want to ID (like on a ham band, perhaps) and see if it helps.

Most of the time, you probably won't need it.  Your antenna may be more than enough for reception with a DX-398.

DX-398's have plenty of gain through the external antenna jack; and being a digital portable, they can be susceptible to overload (I have a 398 and have not experienced this, but I've read some comments on other forums where guys have said they had overload issues with a 398, and if memory serves, I think Chanter on this forum mentioned she had some overload issues on MW with her 398).

Good luck with experimenting.
An AM radio Boombox DXer.
+ GE SRIII, PR-D5 & TRF on MW.
The usual Realistic culprits on SW (and a Panasonic).

Offline Muskrat

  • Jr. Member
  • **
  • Posts: 28
  • Near Muncie Indiana
    • View Profile
    • Email
Re: Preamplifier uses
« Reply #7 on: July 21, 2014, 2305 UTC »
Delayed is for using with a transmitter, or transceiver
« Last Edit: July 21, 2014, 2311 UTC by Muskrat »
Grundig Satellit 800, Grundig 450DLX, DX 440, Icom R70, 55ft random wire, built-in telescoping antennas, home-brew Slinky dipole. Central Indiana.
Please send QSLs to muskrat39@hotmail.com

Offline Andy

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Preamplifier uses
« Reply #8 on: September 05, 2014, 1722 UTC »
I can't see any use for a preamp on the HF bands - the band noise alone would exceed the noise generated by the receiver's front end by quite a margin so no benefit would be realised. all you'll probably end up doing is creating intermodulation products. It may have a use if you are restricted to something like a telescopic antenna a couple of feet long, where received signals are extremely weak.

Offline Rafman

  • DXing Phenomena
  • *******
  • Posts: 2584
  • Virgilina Border
  • Pirate Radio: Radio FUN minus Station Management!!
    • View Profile
    • WirelessDX - Collection of Pirate Radio clips by Rafman K4RAF
    • Email
Re: Preamplifier uses
« Reply #9 on: September 05, 2014, 2136 UTC »
After 40 years at this hobby, I prefer [and use] Preselectors vs straight amplifiers... I have an old Grove TUN4 I use occasionally on MW BCB [goes down to 400KHz] & Mizuho SX3 & SX59 Preselectors [Hard to find]...

They can help reception if used sparingly & with receiver RF gain... I never run them wide open, just crack them open to enhance S/N a bit...

However, now that I have gone fully into SDRs, I don't use them whatsoever. They are plenty sensitive & their noise reduction eliminates the need for them!

Rafman
~
Rafman
Onion Flats [Baskerville] VA USA
[All QSLs greatly appreciated: WIFIDX@gmail.com]
Elad FDM-S1&S2 / SDRplay1 & SDRplay2
Mizuho SX59 & SX3 preselectors / JPS ANC4 Noise Phaser
41m EU beverage / 40m loop / 75m CF Zepp / 41m Sloping Dipole
The "Real FCC" http://bit.ly/2lQDNYm