We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: 6923u yes 6923 ! Commenced ~0240z with voice  (Read 2266 times)

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
6923u yes 6923 ! Commenced ~0240z with voice
« on: June 28, 2010, 0243 UTC »
more to follow

0244z / 9:44 PM CDT some music, but, without zero beating it's tough to copy

Freq looks to be 6923.09 kHz
« Last Edit: June 28, 2010, 0246 UTC by SW-J »
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline Seamus

  • Full Member
  • ***
  • Posts: 140
    • View Profile
    • Email
Re: 6923u yes 6923 !
« Reply #1 on: June 28, 2010, 0245 UTC »
I've got something there, but it's hard to make out.
Might be DSB, because I hear something on the other side around 6.924L.  AM tunes to something, but not making it through the noise well using AM mode.
« Last Edit: June 28, 2010, 0247 UTC by Seamus »
Logged

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 !
« Reply #2 on: June 28, 2010, 0247 UTC »
Quote from: Seamus on June 28, 2010, 0245 UTC
I've got something there, but it's hard to make out
Try 6923.09 kHz ... otherwise I could not copy either ..


Geez ... their freq shifted ... now 6923.24 ...
« Last Edit: June 28, 2010, 0249 UTC by SW-J »
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 !
« Reply #3 on: June 28, 2010, 0251 UTC »
Quote from: Seamus on June 28, 2010, 0245 UTC
I've got something there, but it's hard to make out.
Might be DSB, because I hear something on the other side around 6.924L.  AM tunes to something, but not making it through the noise well using AM mode.

Can detect nothing on LSB on the 756ProII with 6923.22 on the dial ...
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline Seamus

  • Full Member
  • ***
  • Posts: 140
    • View Profile
    • Email
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #4 on: June 28, 2010, 0255 UTC »
Just checked the LSB side again and got nothing.  Maybe switched modes?  Or I was hearing things.  Couldn't pull out anything intelligible before anyway.

02:52 - got speech of some sort, but it still isn't making it through well. 
02:53 - back to music - harmonica - bluegrass type?

SIO only around 333 or worse here - getting clobbered by the noise.
Logged

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #5 on: June 28, 2010, 0258 UTC »
Quote from: Seamus on June 28, 2010, 0255 UTC
Just checked the LSB side again and got nothing.  Maybe switched modes?  Or I was hearing things.  Couldn't pull out anything intelligible before anyway.

02:52 - got speech of some sort, but it still isn't making it through well. 
02:53 - back to music - harmonica - bluegrass type?

SIO only around 333 or worse here - getting clobbered by the noise.

I need a receiver that tunes in 1 Hz steps ... this guy is down to 6923.17 kHz now ... that's the biggest problem, is freq shift or drift ... voice comes through at a couple hundred Hz off, but music sounds like ... noise that far off!

Freq = 6923.17 kHz ATTM

Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #6 on: June 28, 2010, 0306 UTC »

0306z / 10:05 PM CDT Frequency shift again - 6923.29 kHz now ...
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #7 on: June 28, 2010, 0311 UTC »

0311z / 10:11 PM CDT still 6923.29 kHz

Signal is just under S2 (no preamp) and I have static crashes at a regular interval to S3 and sometimes S5
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m

Offline Seamus

  • Full Member
  • ***
  • Posts: 140
    • View Profile
    • Email
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #8 on: June 28, 2010, 0316 UTC »
03:12 - got voice after the music: laughing, able to make out the words "funny" and "frequency" before apparently shifting frequency

Tuned up to 6.925 to find an "Outhouse Radio" ID.  Same signal?
Logged

Offline SW-J

  • Hero Member
  • *****
  • Posts: 544
  • Dallas, Texas
    • View Profile
Re: 6923u yes 6923 ! Commenced ~0240z with voice
« Reply #9 on: June 28, 2010, 0319 UTC »
Quote from: Seamus on June 28, 2010, 0316 UTC
03:12 - got voice after the music: laughing, able to make out the words "funny" and "frequency" before apparently shifting frequency

Tuned up to 6.925 to find an "Outhouse Radio" ID.  Same signal?
Different I think ... I started a new topic ... different theme music shall we say, maybe 'mechanical' in nature compared to Bluegrass ...
Logged
o Icom IC-756ProII, ProIII, Alinco DX-70, Kenwood TS-680s
o WinRadio G303e, Degen/Kaito 1103/DE1103, Stoddart NM-25
o 1/2 wave 80m Dipole used with several tuners
o Tuned loops from 2' thru 16' diam. capable of 160m thru 10m
Pages: [1]
« previous next »