We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissable in your locale.

Author Topic: Tecsun S 2000 receiver (aka Grundig Satellite 750).  (Read 4390 times)

Offline BoomboxDX

  • Hero Member
  • *****
  • Posts: 590
    • View Profile
Re: Tecsun S 2000 receiver (aka Grundig Satellite 750).
« Reply #15 on: January 25, 2017, 1422 UTC »
Looking-Glass, you get much MW from Asia, just north of you (well, it's about 2000 miles N)?
An AM radio Boombox DXer.
+ GE SRIII, PR-D5 & TRF on MW.
The usual Realistic culprits on SW (and a Panasonic).

Offline Looking-Glass

  • Hero Member
  • *****
  • Posts: 616
    • View Profile
Re: Tecsun S 2000 receiver (aka Grundig Satellite 750).
« Reply #16 on: April 04, 2017, 2238 UTC »
No, very hard to hear any real long distance DX on MW here due to the amount of higher power Australian MW stations, tried the Grey Line.  Being close to Sydney, 127 kms away, I get very strong bleed over and harmonic crud from MW.

Best distances I get are to Western Australia (3 to 4,000kms) and across to New Zealand (2 to 3,000kms).  

Most of the Asian stations would be buried under Australia and New Zealand stations.  Would probably have better luck if I went another 100 or so kilometres west of here to escape the crud and noise from Sydney splash overs etc.

The best distance within relation to Asia would be JJY on 60KHz received here in March 2016 around 1600z for around 8,000kms, not to be repeated this year though, propagation has been lousy.
« Last Edit: April 05, 2017, 0936 UTC by Looking-Glass »
Hermitage Flat, NSW.

Grid Square:  QF56dm.

Yaesu FT-2000D, ICOM IC-736 HF/50MHz, ICOM IC R75 & Tecsun S-2000 to 450 feet of wire, and a multi band vertical of dubious reliability.