We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissable in your locale.

Author Topic: Ground wave propagation at WWV's transmitter site  (Read 1508 times)

Offline MDK2

  • DX Legend
  • ******
  • Posts: 4408
  • Karma: +41/-9
  • Denver, CO
    • View Profile
    • My radio reception videos
Ground wave propagation at WWV's transmitter site
« on: March 14, 2017, 2229 UTC »
I didn't actually see any building at 2000 East County Road 58, but I did see the transmitter towers.

https://www.youtube.com/watch?v=8YrohSc62JE
Denver, CO.
SDRPlay RSP2pro, Icom IC-7100, Grundig Satellit 750, Realistic DX-300, Tecsun PL-600.
W6LVP active loop, G5RV, 20m dipole, homebrewed mag loops.
eQSLs appreciated wickerjennie at gmail

Offline Josh

  • DX Legend
  • ******
  • Posts: 4079
  • Karma: +12/-20
    • View Profile
Re: Ground wave propagation at WWV's transmitter site
« Reply #1 on: March 15, 2017, 1530 UTC »
Lol when I was a kid and first tuned across wwv I was thinking my god this guy has the most boring job in the world.
We do not encourage any radio operations contrary to regulations.

Offline R4002

  • DX Legend
  • ******
  • Posts: 2608
  • Karma: +1/-0
    • View Profile
Re: Ground wave propagation at WWV's transmitter site
« Reply #2 on: April 09, 2017, 1719 UTC »
Wish they would bring back 30000 and 35000.  Having the 25000 25 MHz signal is handy for 11 meter and 10 meter band openings as well as indicating a possible VHF low 30-50 MHz band opening.
U.S. East Coast, various HF/VHF/UHF radios/scanners/receivers

Offline Teotwaki

  • DX Legend
  • ******
  • Posts: 2191
  • Karma: +12/-1
  • California
    • View Profile
    • My adventures are at Sun To The North
Re: Ground wave propagation at WWV's transmitter site
« Reply #3 on: April 12, 2017, 1348 UTC »
Lol when I was a kid and first tuned across wwv I was thinking my god this guy has the most boring job in the world.

 ;D  here you go.... 

https://m.youtube.com/watch?v=9CpsPgXyIm8
Jim
NRD-525, Elecraft KX3 and Elecraft PX3 Spectrum Display
76' end fed long wire & 66' off-center fed dipole for 10/20/40 meters
Orange County, SoCal, The better half