We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: USCG having TX issue on 6501USB 22:15 UTC 4/17/2018  (Read 1336 times)

Offline CaptnKliegle

  • Full Member
  • ***
  • Posts: 136
  • Seacoast of NH
  • Is this thing on?
    • View Profile
USCG having TX issue on 6501USB 22:15 UTC 4/17/2018
« on: April 17, 2018, 2252 UTC »
I was roaming the bands and found this, barely intelligible signal due to it's width, after some googling I came up with USCG on 6501 USB with marine WX out of Chesapeake, station NMN.

Seacoast of NH  RXR's =3 X SDR-iq's, 1 x SDRPlays, and 11 AirspyHF+'s . TXR's = 2 X TS-590S,  ANAN200D, 2 x IC-7300's, IC-7610, 2 X IC-7100. Antennas = Resonant wire dipoles, 120' end fed wires, or 2 X SteppIR 3 ele beam @ 70' fixed NE/SW directions. Also host Remotehams.com servers (RX/TX) as well as SDR Console servers V3.xx (RX Only) too!

Offline CaptnKliegle

  • Full Member
  • ***
  • Posts: 136
  • Seacoast of NH
  • Is this thing on?
    • View Profile
Re: USCG having TX issue on 6501USB 22:15 UTC 4/17/2018
« Reply #1 on: April 17, 2018, 2311 UTC »
Close up of distortion:
Seacoast of NH  RXR's =3 X SDR-iq's, 1 x SDRPlays, and 11 AirspyHF+'s . TXR's = 2 X TS-590S,  ANAN200D, 2 x IC-7300's, IC-7610, 2 X IC-7100. Antennas = Resonant wire dipoles, 120' end fed wires, or 2 X SteppIR 3 ele beam @ 70' fixed NE/SW directions. Also host Remotehams.com servers (RX/TX) as well as SDR Console servers V3.xx (RX Only) too!

Offline Josh

  • DXing Phenomena
  • *******
  • Posts: 4322
    • View Profile
Re: USCG having TX issue on 6501USB 22:15 UTC 4/17/2018
« Reply #2 on: April 17, 2018, 2352 UTC »
They've had similar issues with their fax sigs.
We do not encourage any radio operations contrary to regulations.

 

HFUnderground Mug
HFUnderground Mug
by MitchellTimeDesigns