We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissable in your locale.

Author Topic: Cat6 wire for RX antenna  (Read 695 times)

Offline jace

  • Jr. Member
  • **
  • Posts: 23
  • Karma: +0/-0
  • Nashville International Airport / BNA
  • Fulltime : B.S Computer science, student
    • View Profile
    • Email
Cat6 wire for RX antenna
« on: October 07, 2018, 1518 UTC »
8 wires = 4 twisted pair
What kind band range would cat6 receive?
I've been suggested to wrap multiple loops around the bedroom window, yet my issue lies in; will cat6 work for RX?
Icom 7200 / Icom 2300H  
Tripp Lite DC converter 13.8v 3/5a  RX only
Antenna : HF 60' CAT6 / 2m Comet M-24M  
PRO 404 scanner 
Baofeng UV-5RQ  Retech whip

Offline IQ_imbalance

  • Full Member
  • ***
  • Posts: 229
  • Karma: +0/-0
  • Central MD
    • View Profile
Re: Cat6 wire for RX antenna
« Reply #1 on: October 07, 2018, 1600 UTC »
Pretty much any wire will work for receiving.  The tricks are 1) location, 2) geometry, and 3) getting a reasonable impedance match to your feedline and/or radio (doesnít have to be exact...but you donít want a high Z antenna trying to feed a low Z input or vice versa.

I had decent (eg better than the included whip) results with some plain old enameled wrapping wire connected to my Sony portable.  In fact, my old grinding came with an external antenna that was just a spool of 28-ish GA wire with a plug on the end.

Play around with it and have fun. Plastic thumbtacks are useful for temporary installations inside....

LOG/NE-SW unterminated BOG
Central MD