We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: Identifying Vintage Radio  (Read 1841 times)

Offline Telegrapher

  • Jr. Member
  • **
  • Posts: 47
    • The Netherlands
  • UVB-76 bought me in the SWL'ing habit.
    • View Profile
    • Email
Identifying Vintage Radio
« on: January 14, 2019, 1852 UTC »
Hello all,

I recently came across an old AM radio on a dumb store for $4. I wonder if it's a rare piece. I can't really find anything about it on the web. And I need a manual for correcting the frequencies as I was testing the PCB and turned some coils to make sure all was still connected.. And it was.

The parts I have questions about are:
Is it a rare piece?
Is there a source where I can find the manual for it?
Misc info regarding everything I need to know about it. How to correct the tuning screws etc..

I hope someone here can help me out.

Just registered as a new member. So I like to say hello to all!

https://imgur.com/a/MIsP5RH


Kind regards,
Telegrapher.
Logged

Offline Stretchyman

  • Hero Member
  • *****
  • Posts: 656
    • View Profile
Re: Identifying Vintage Radio
« Reply #1 on: January 14, 2019, 2104 UTC »
Rare? Looks like a $5 Japanese Superhet. I'd leave the 'Tuning Screws' alone.
« Last Edit: January 14, 2019, 2107 UTC by Stretchyman »
Logged
'It's better to give than receive' so why Rx when you can Tx!

                                              ;)

Offline Josh

  • DXing Phenomena
  • *******
  • Posts: 4322
    • View Profile
Re: Identifying Vintage Radio
« Reply #2 on: January 14, 2019, 2135 UTC »
Standard am transistor radio alignment protocol should apply. One of the IF cans will be for the oscillator, the rest will be for the IF strip. A cap will set the high end of the tuning range.
https://www.youtube.com/watch?v=--cLuftsJR0
https://www.vintage-radio.com/repair-restore-information/transistor_alignment.html
Logged
We do not encourage any radio operations contrary to regulations.

Offline Davep

  • DXing Phenomena
  • *******
  • Posts: 2849
    • Va Beach Va
    • View Profile
Re: Identifying Vintage Radio
« Reply #3 on: January 15, 2019, 0233 UTC »
What Josh said., the cans were probably ok ! :-[

Does it have a brand name?
Logged
Va Beach Virginia
Modified Dx 394 audio Altec Lansing ACS43
Folded dipole

Offline Telegrapher

  • Jr. Member
  • **
  • Posts: 47
    • The Netherlands
  • UVB-76 bought me in the SWL'ing habit.
    • View Profile
    • Email
Re: Identifying Vintage Radio
« Reply #4 on: January 15, 2019, 0944 UTC »
On the back I can see a logo with the following details:

(L3) or (B) as the brand logo, U.K. DESING
REGISTRATION NO.1038735

I just discovered the number of the device finally.. It's hard to see when all is printed on a white plastic board as the letters are white also. So I needed to hold in in daylight to clearly see the description on the back :P

And yeah I was already assuming that it wasn't that much of a vintage radio, maybe a replica or something indeed from either Japan or China as they are good at making this kind of stuff (just using a 3D printer for the housing and that's it). I was just curious as the design looks kinda old fashioned so that's why I posted it here in the first place. Anyways, thanks for giving some advice. Time to hunt for the next piece this week :) Maybe this one will be rare.. Flee markets are like a lottery and a surprise box where anything might pop-up :D

Kind regards,
Telegrapher.
Logged

Offline Telegrapher

  • Jr. Member
  • **
  • Posts: 47
    • The Netherlands
  • UVB-76 bought me in the SWL'ing habit.
    • View Profile
    • Email
Re: Identifying Vintage Radio
« Reply #5 on: January 15, 2019, 1652 UTC »
Is there a way to turn a Raspberry PI 3 into a signal generator for AM like shown in the video above? I have an oscilloscope handy but fine-tuning is kinda hard when everything has turned off-band. Any tips or suggestions? I would appreciate it very much :)

Kind regards,
Telegrapher.
Logged
Pages: [1]
« previous next »