We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissable in your locale.

Author Topic: Reception time  (Read 477 times)

Offline IZS4

  • Hero Member
  • *****
  • Posts: 668
  • Karma: +2/-1
  • Florida
    • View Profile
Reception time
« on: January 08, 2020, 1249 UTC »
How long does it typically take to receive a standard weather fax? Thanks
Yaesu FT-818 with a 135' OCF dipole and an RSP SDR receiver connected to an MLA-30 loop.

Offline fpeconsultant

  • DX Legend
  • ******
  • Posts: 1119
  • Karma: +7/-0
  • I miss "Up Against the Wall Radio"...
    • View Profile
    • Email
Re: Reception time
« Reply #1 on: January 08, 2020, 1542 UTC »
My two cents:
Anywhere from 5 to about 20 minutes depending on what is being transmitted- a landscape oriented fax from New Orleans (NMG) that covers about from the west coast of Africa to middle of the USA could take 20 minutes start to end.
Hope that helps you.
FPE
Near Chicago, IL USA.  Drake R8, Ten-Tec RX340, JRC NRD545, Watkins Johnson HF-1000, Wellbrook loop at 28', 40m inverted vee.  Please QSL to fpeconsultant@aol.com thanks.

Offline IZS4

  • Hero Member
  • *****
  • Posts: 668
  • Karma: +2/-1
  • Florida
    • View Profile
Re: Reception time
« Reply #2 on: January 08, 2020, 1805 UTC »
Thanks. That gives a good representation of what to expect time wise.
Yaesu FT-818 with a 135' OCF dipole and an RSP SDR receiver connected to an MLA-30 loop.