We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: PC problem after transmitting  (Read 1702 times)

Elf36

  • Guest
PC problem after transmitting
« on: October 17, 2021, 1853 UTC »
So, I'm having an issue that I probably can't fix, but I thought I'd throw it out there. I keep having to pull out the USB connection from the back of the PC and plug it back in. It seems to always lose connection after transmitting on my HF rig? It doesn't happen to my wife when she uses it.

Offline ThaDood

  • DX Legend
  • ******
  • Posts: 1209
  • Likely, not where you are.
    • View Profile
    • Extreme Part #15!
    • Email
Re: PC problem after transmitting
« Reply #1 on: October 17, 2021, 2011 UTC »
Did you try snapping on a ferrite choke on that cable that the USB connector is attached too? Sounds like RF peaks are getting in there, somehow.
I was asked, yet another weird question, of how I would like to be buried, when I finally bite the big one. The answer was actually pretty easy. Face-down, like a certain historical figure in the late 1980's, (I will not mention who, but some of you will get it, and that's enough.) Why??? It would be a burial that will satisfy everyone: (1) My enemies will say that it will show me where to go. (2) On the same point, I can have my enemies kiss my butt. (3) It will temporarily give someone a place to park a bicycle. See??? A WIN / WIN for everyone.

Elf36

  • Guest
Re: PC problem after transmitting
« Reply #2 on: October 17, 2021, 2017 UTC »
Great idea. I have a few clip-on chokes around here somewhere. I'll try that out.

Offline redhat

  • DX Legend
  • ******
  • Posts: 1585
  • USA
  • Music is my drug.
    • View Profile
    • Email
Re: PC problem after transmitting
« Reply #3 on: October 18, 2021, 0549 UTC »
I have a keyboard that does that.  Only happens on 73 meters for some reason...  ::)

+-RH
Somewhere under the stars...
Airspy HF+, MLA-30/Mini-whip/Chi-Town Loop
Please send QSL's and reception reports to xfmshortwave [at] proton [d0t] me

Elf36

  • Guest
Re: PC problem after transmitting
« Reply #4 on: October 18, 2021, 1302 UTC »
Yeah. It's quite annoying having to reset the USB plug over and over, especially when I'm trying to confirm call signs on QRZ, checking DX clusters or posting here in real time. I put one clamp on choke on the cable so far. I'll try to get some more when I can. Thanks for the feedback.

Offline NJQA

  • Sr. Member
  • ****
  • Posts: 322
  • Virginia
    • View Profile
Re: PC problem after transmitting
« Reply #5 on: October 19, 2021, 1146 UTC »
I don’t know if this will help or not, but you can buy USB isolators.  Amazon sells several different types; this is one example:

https://www.amazon.com/HiLetgo-ADUM3160-Voltage-Isolator-Support/dp/B07235PR4V/ref=sr_1_7_sspa?

I would first try the ferrite chokes.  Make sure you are using ferrites appropriate for the frequency range you are experiencing problems with.  Often the ones you find on line use a mix designed for VHF frequencies.  If you are having problems with 80 meters you are going to want to look for something using mix 75 or so.  DXengineering has a good selection of mixes.

If the ferrite chokes aren’t successful, you might then want to try the USB isolator to see if it helps.

Offline NJQA

  • Sr. Member
  • ****
  • Posts: 322
  • Virginia
    • View Profile
Re: PC problem after transmitting
« Reply #6 on: October 19, 2021, 1158 UTC »
While on the subject of USB, I’d like to offer this hint.

Sometimes when powering up the computer and rig, one of them doesn’t boot up fast enough and the result is that computer doesn’t recognize that the rig is plugged in.  Rather than unplugging the USB cable and plugging it back in (which is needless wear and tear on the USB connection), I bought a two port electronic USB switch.  Now I simply have to push the button to cycle the ports and get the computer to recognize the radio.  Amazon has them cheap.

Elf36

  • Guest
Re: PC problem after transmitting
« Reply #7 on: October 19, 2021, 1429 UTC »
Thanks, I will look into this. Most of the time the radio is disconnected from USB connection unless using PSK31, SSTV or WEFAX.
         

 

HFUnderground T-Shirt
HFUnderground Garden Flag
by MitchellTimeDesigns