We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023  (Read 1493 times)

Ct Yankee

  • Marconi Class DXer
  • ********
  • Posts: 9172
  • Grown to keep away evil radio noise in Durham CT
    • Email
Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023
« on: January 18, 2023, 2029 UTC »
Fair reception

2028 Brother Stair bobbing just above/below the noise floor
2041 OM singing spiritual/blues song, quite a bit of bleed over from Radio Saudi on 9675
2044 YL with spiritual song, backing vocals
« Last Edit: January 18, 2023, 2046 UTC by Ct Yankee »
Logged
Tecsun H501x (broadcast received on this unless noted), Zenith T/O G500, Zenith T/O Royal 7000, Emerson AR-176, Zenith 8S154, T/O 7G605 (Bomber), Tecsun PL-600, Tecsun PL-880, Zenith 5S320, Realistic DX 160 using 40 feet of copper wire.  With apologies to Senator Gramm for his thoughts on firearms, "I have more radios than I need but not as many as I want."
QTH:  Durham, Connecticut (rural setting, 15 miles north of Long Island Sound)
qsl please to:  [email protected]  (Thank you)

Ray Lalleu

  • Moderator
  • Marconi Class DXer
  • *****
  • Posts: 50682
    • Western part of France
Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023
« Reply #1 on: January 18, 2023, 2059 UTC »
Brother Stair is not welcomed in the European pirate and private forum.

Moving that tip to Shortwave broadcast


 
Logged
D/E/F/G/It/Sp : Dutch/English/French/German/Italian/Spanish
+/- : about 0.02 offset, ++/-- 0.03/0.04 offset
Balanced wire antennas, wire lines and ATU
*** Semaines des ondes courtes, pages médias et technique, en français, demandez  les par message ici dans HFU ***

Pigmeat

  • Marconi Class DXer
  • ********
  • Posts: 6701
Re: Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023
« Reply #2 on: January 18, 2023, 2322 UTC »
I heard Ralph bellowing from beyond the grave on a Channel 292 frequency about a week ago. The Overcomer Ministry is taking over the European airwaves. I can hear his acolytes telling the converts, "American money only, the Euro is too weak against the dollar."
Logged

East Troy Don

  • DX Legend
  • ******
  • Posts: 1703
    • Southern Wisconsin
  • "If you can't convince them, confuse them" Truman
Re: Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023
« Reply #3 on: January 19, 2023, 0233 UTC »
Let's give credit where credit is due.  Brother Stair is one of the few people who is louder dead than he was alive.  :)
Logged
Primary: ICOM R75 W/WV-601 passive loop masted @ 20'  Secondary: Tecsun S2200X . Yaesu  FRG 7700 W/MLA-30+ indoors. Tertiary: Tecsun PL-990X, Tecsun PL-880 . Malahit DSP SDR V3,  . : Also, Qdosen DX-286, 1940 Mantola am/sw tube. CountyComm GP-5/SSB hand held, Tecsun PL-380 ,et al.  QTH: FONTANA, WI  USA.  Sea Level: + 990' .  75 miles (but not far enough) NW of Chicago

Pigmeat

  • Marconi Class DXer
  • ********
  • Posts: 6701
Re: Brother Stair via Channel 292 9670 AM 2028 utc 18 Jan 2023
« Reply #4 on: January 19, 2023, 1545 UTC »
I beg to differ. I was under WBCQ's supposed beam to the South Pacific. The Sage of Walterboro, SC rattled the windows on all of their frequencies.
Logged
Pages: [1]
« previous next »