"Madonna" (named for the Virgin Mary plaster figure out in a remote desert location) - so the beacon was implanted years ago about 500m from that plaster Madonna figurine.
It was formerly the "Inyo Whooper" implanted around 2007 - whooping day only on 4097.25 +/-, then modified for a more stable fast-dasher and implanted by that Madonna statue figurine as justmentioned; it was retrieved in mid-Sept. 2025 (off air by then due to animal-trashed antenna) and taken back to its original construction "home" where now it runs about 24 DPM when switched on, with maybe 75 to 100 mW ERP just for testing and propagation checking via remote SDRs.
A new 4096.0 (nominal) xtal was swapped-in, replacing the former 4097 kHz xtal specially made by another gent. who joined me on oodles of beacon implantations and maint. hikes starting in 1997 up to around 2003. He (Ed) had a handful of 4097 kHz xtals specially made, and he kindly gave me a couple - hence that 4097.25-ish beacon in two different locations in the boonies. It is now around 4096.37-ish "Madonna-at-home" - the only beacon xmtr. installed into a nice aluminum enclosure with a power jack and antenna (BNC) jack output; LED power indicator light, etc. Like a "desktop beacon."
And so it now just remains on a test bench for occasional xmsns by day; night; or maybe 24 hours for a run of a few days (like right now) - again, very low ERP compared to the remote beacons which always get out so well due to a lack of parasitic objects in the near-field near their 1/2 wave dipoles... 73 - MB - tnx all for keeping up the torch! ...