We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: unidentified 6925.3 LSB 0015 UTC 2 August  (Read 1168 times)

Ron Hunsicker

  • DX Legend
  • ******
  • Posts: 1635
  • Wyomissing, Pennsylvania
    • Email
unidentified 6925.3 LSB 0015 UTC 2 August
« on: August 02, 2020, 0017 UTC »
Blues, then five SSTV transmissions.  Slowly moving up frequency--about 200 Hz in10 minutes.
35332 at 0017

Ron
Ron Hunsicker
Wyomissing, Pennsylvania 
ronhunsi at ptd.net
Elad FDM-S3, Drake R-4B, a dipole cut for 6955 and a DX Engineering Amplified Vertical

Ron Hunsicker

  • DX Legend
  • ******
  • Posts: 1635
  • Wyomissing, Pennsylvania
    • Email
Re: unidentified 6925.3 LSB 0015 UTC 2 August
« Reply #1 on: August 02, 2020, 0019 UTC »
As I hit "Post," it went away.


Ron
Ron Hunsicker
Wyomissing, Pennsylvania 
ronhunsi at ptd.net
Elad FDM-S3, Drake R-4B, a dipole cut for 6955 and a DX Engineering Amplified Vertical

flexoman61

  • DXing Phenomena
  • *******
  • Posts: 3533
  • Connecticut, USA
    • Email
Re: unidentified 6925.3 LSB 0015 UTC 2 August
« Reply #2 on: August 02, 2020, 0021 UTC »
A few SSTVs since 0002z, OM also? Hard time tuning in. Poor copy overall.
Please QSL to: [email protected]
Connecticut
ICOM R75, Kenwood R-2000
Radio Shack PRO-2037
43m band folded dipole/VHF ground plane

Dr. Strangelove

  • DXing Phenomena
  • *******
  • Posts: 4341
  • Northwest Alabama
    • Email
Re: unidentified 6925.3 LSB 0015 UTC 2 August
« Reply #3 on: August 02, 2020, 0025 UTC »
Really tough to hear here.  Just bits through the noise
R-390a, WJ-8718, Rohde & Schwarz EK07 and EK56, Siemens E311, 51-J4, R8, IC-7610. All reports are from my radios and antennas at my QTH.  Please QSL to [email protected]   Northwest AL EM64