We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: Wanted: Icom OPC-023C DC power cable  (Read 4886 times)

jta

  • Jr. Member
  • **
  • Posts: 40
Wanted: Icom OPC-023C DC power cable
« on: September 06, 2020, 1747 UTC »
Anyone have an Icom OPC-023C that they're not using and no longer need? This cable fits the R7100, R8500, and R9000 V/Uhf receivers. Will pay a reasonable price for one. Icom says they're discontinued.

Contact me via PM or direct.

Thanks! jta
Logged

NJQA

  • Sr. Member
  • ****
  • Posts: 348
    • Virginia
Re: Wanted: Icom OPC-023C DC power cable
« Reply #1 on: September 07, 2020, 1222 UTC »
If you are talking about the 4 pin molex connector on the back of the 7100 and 8500, those connectors are common and easy to get.  It would be easy to put together a DC power cable.   Probably less than $10 worth of materials with new parts.
Logged

ThaDood

  • DX Legend
  • ******
  • Posts: 1648
    • Likely, not where you are.
    • Extreme, Part #15!
    • Email
Re: Wanted: Icom OPC-023C DC power cable
« Reply #2 on: September 08, 2020, 0538 UTC »
I believe that Tower Electronics carry those at    http://www.pl-259.com/page4.html     And, or e-mail Scott & Jill at   [email protected]   to inquire. Hope that helps.
Logged
The best two statements of advice that I've ever gotten are from my brother-in-law in the early 1990's. 1st one, when I bought a used '89 Olds Cutless, my bro-in-law said, "Congratulations!!! You've just bought a deficit!". The other, was on a work environment, " No matter where you go, it's going to be f***'ed -up!". No truer words have been spoken.

NJQA

  • Sr. Member
  • ****
  • Posts: 348
    • Virginia
Re: Wanted: Icom OPC-023C DC power cable
« Reply #3 on: September 08, 2020, 1124 UTC »
The one he is looking for has the pins all in one line, not the more common square (2 over 2) type found today.  It looks like two of the pins are jumpered together too.  Still worth checking with Tower though!
Logged

ThaDood

  • DX Legend
  • ******
  • Posts: 1648
    • Likely, not where you are.
    • Extreme, Part #15!
    • Email
Re: Wanted: Icom OPC-023C DC power cable
« Reply #4 on: September 09, 2020, 1831 UTC »
Awh yeah... You're probably right. Maybe better for him to 'roll his own' here.
Logged
The best two statements of advice that I've ever gotten are from my brother-in-law in the early 1990's. 1st one, when I bought a used '89 Olds Cutless, my bro-in-law said, "Congratulations!!! You've just bought a deficit!". The other, was on a work environment, " No matter where you go, it's going to be f***'ed -up!". No truer words have been spoken.
Pages: [1]
« previous next »