1
HF Beacons / Re: Mixed CW / FSK beacon(?) on 4095.38
« on: October 17, 2023, 0022 UTC »
For Kiwis that have updated to software version v1.630 (most of them by now) I have added entries to the community DX label database for this beacon. Press the backslash ("\") key until the frequency scale shows "database: community" as shown in the attached image (red arrow on left). Then zoom in to 4095 kHz to see the labels.
There are two labels. Clicking on them will start the Kiwi CW or FSK decoder extensions preset for the beacon parameters. The Kiwi CW decoder is not so good. It requires a high SNR to function at all. The FSK decoder is pretty good though. As shown most of the FSK decodes fine. This was from a Kiwi in Sweden at 00:00Z. The right side of the labels have a clickable link that takes you to the HFU Wiki for the beacon.
![](http://kiwisdr.com/files/Beacon_C&P5_4095_kHz_FSK_1280px.png)
There are two labels. Clicking on them will start the Kiwi CW or FSK decoder extensions preset for the beacon parameters. The Kiwi CW decoder is not so good. It requires a high SNR to function at all. The FSK decoder is pretty good though. As shown most of the FSK decodes fine. This was from a Kiwi in Sweden at 00:00Z. The right side of the labels have a clickable link that takes you to the HFU Wiki for the beacon.
![](http://kiwisdr.com/files/Beacon_C&P5_4095_kHz_FSK_1280px.png)