We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: DIP SWITCH PROGRAMMING  (Read 1038 times)

Offline TimL

  • Newbie
  • *
  • Posts: 4
    • Upstate South Carolina, USA.
  • Listening out near the Blue Ridge Mountains.
    • View Profile
DIP SWITCH PROGRAMMING
« on: February 08, 2024, 2149 UTC »
Hi everyone!  I'm a complete dunce when it comes to DIP switches and math in general. Does anyone know of a really dummies guide to programming an 8 switch? Or assist generally?  Many thanks.
Logged
Tim Lewis. Various SDRs and hard radios. MLA-30. MLA-30+. 118ft random wire. 18 ft random wire. Moonraker HF vertical. Having fun!

Offline ThaDood

  • DX Legend
  • ******
  • Posts: 1240
    • Likely, not where you are.
    • View Profile
    • Extreme Part #15!
    • Email
Re: DIP SWITCH PROGRAMMING? That depends upon various factors.
« Reply #1 on: February 10, 2024, 1940 UTC »
Unfortunately, that's a fairly broad question, since that all depends upon the circuit designer, and the type of PLL IC's used. Panaxis had their own scheme, with a DIP switch Chart for FREQ setting. Ransey Electronics Kits did that math equation with X100, X10, and X1, with Motorola PLL IC's. And, from what I'm told, those newer Chez Pocasters and, (I'm brainfarting on the Part 15 TX MFG'er...), still uses the DIP switch scheme. So, with the lack of documentation, may I suggest loading to a dummyload, with an attenuated RF sample OUT, to a FREQ counter and try it that way. BTW, there were several Two-Way radios that could be programmed that way as well. Hmmmmmmm... Back to transmitters, with DIP Switch FREQ settings, I probably should upload the Panaxis manuals to my Archive.org site.  Anyway... I hope that this helps. Oh yeah... Progressive Concepts may have manuals for their Part 15 transmitters.  https://progressive-concepts.com/product-category/am-transmitters/    Ah!!!! Rangemaster!!! That, was the one that escaped me.
Logged
Recently, a co-worker quizzed me on, "What would happen if you were to apply reverse polarity to the Energizer Bunny?". Having no idea, I asked, "What would happen?". The answer is he'd keep coming and coming and coming...

Offline ThaDood

  • DX Legend
  • ******
  • Posts: 1240
    • Likely, not where you are.
    • View Profile
    • Extreme Part #15!
    • Email
Re: DIP SWITCH PROGRAMMING? Boomer found this!
« Reply #2 on: March 07, 2024, 1744 UTC »
https://www.tompolk.com/radios/frequencysynthesizer/freqsynth.html   This page should help. THANK YOU Boomer!!!
Logged
Recently, a co-worker quizzed me on, "What would happen if you were to apply reverse polarity to the Energizer Bunny?". Having no idea, I asked, "What would happen?". The answer is he'd keep coming and coming and coming...
Pages: [1]
« previous next »
 

HFUnderground Mug
HFUnderground Mug
by MitchellTimeDesigns