We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

Author Topic: New ColibriNano SDR Receiver  (Read 2942 times)

Offline Oliver

  • DX Legend
  • ******
  • Posts: 1482
  • Germany
    • View Profile
    • Email
New ColibriNano SDR Receiver
« on: March 28, 2017, 1243 UTC »

Software support

CW Skimmer
Skimmer Server
Third party software using ExtIO library


Receiving bandwidth: 0.1 55 MHz
Oversampling receiving: 0.1 500 MHz
Blocking Dynamic Range (BDR): 110 dB
Sensitivity: 0.05 uV at 20M band, preamp = 0
IMD3 Dynamic Range: 95 dB
ADC resolution: 14-bit @ 122.88 MHz
Sample rate: 48, 96, 192, 384, 768 kHz and 1.5, 3.0 MHz
IQ resolution: 24 bit (16 bit at 1.5 and 3 MHz sample rates)
RF Input: (SMA connector, up to 15kV ESD protection)
Preamp range: from 31.5 up to +6 dB with 0.5 dB steps
Operating temperature: -10C to 60C
Dimensions: 90х25х17mm
Weight: 0.043kg


Remote control using Pileup RPI server
SMA to BNC adapter
SMA to UHF adapter
CCW MW/HF active loop antenna

The stick is available on fleabay for $249.95 as pre-order.
RX: Elad FDM-S2, Grundig Satellit 700
Ant.: HDLA 3 (Active Loop)@315, EWE @270, ALA 100LN, MiniWhip
QTH: JO31 (Germany)

Please send eqsl to: oliverinusa[at]yahoo.de

Offline Josh

  • DXing Phenomena
  • *******
  • Posts: 4322
    • View Profile
Re: New ColibriNano SDR Receiver
« Reply #1 on: March 28, 2017, 1622 UTC »
This sounds impressive in terms of dynamic range and sensitivity, especially the "up to 15kV ESD protection".
We do not encourage any radio operations contrary to regulations.


HFUnderground Mug
HFUnderground Mug
by MitchellTimeDesigns